Marine vessel control using the tiller-motor system.

نویسندگان

  • R Lulham
  • C D Burt
چکیده

Operator performance on the tiller-motor system was investigated in a field survey and in a tracking simulator. Boat operators in Study 1 reported both control difficulties and discomfort, when using their tiller-motor system. Participants in Study 2 operated a tiller-motor simulator of a boat navigating a river over a 20 min period. Directional and speed control performance was found to be poor, particularly on the first trials and under emergency conditions. These results support the suggestion that the incompatible nature of the control/response relationship in tiller-motor systems can cause operator difficulties. The dimensions of the simulator were systematically varied and found to influence operator shoulder extension, and ratings of exertion and discomfort. Recommendations for tiller-motor system design and installation are offered.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of air injection system for drag reduction in high speed vessels using numerical simulation software ANSYS-Fluid Flow

Many existing phenomena in nature are considered new design ideas in various fields of industry. Bionics is the application of biological methods and systems found in nature to the study and design of engineering systems and modern technology. By performing bionic review, the researchers found the penguins by delivering air locked under their wings and creating air bubbles, the drag significant...

متن کامل

تدوین اصول و مدل ریاضی اندازه گیری حرکات ششگانه شناور پروازی در دریا

Seakeeping recording of a vessel, so called seakeeping trial, is an important issue which is performed for some vessels. The goal of this research is to develop principles of seakeeping trial of planing vessel in sea waves. For this purpose it is initiated with the principles of ship seakeeping in sea trial. The main feature of a planing vessel is dynamic trim, high slamming accelerations and i...

متن کامل

Hydrodynamic Frequency Analysis of a Uniformly Moored SPM in Persian Gulf Environment Using Numerical Method

Single Point Mooring (SPM) are floating Structures that are deployed in deep water which their duties are vessel mooring and transferring oil and gas productions by pipelines from shore to petroleum tankers and conversely. One of the most important components of SPM is mooring system. Which bears not only environmental loads but also petroleum tanker loads which conducted by two thick ropes. Mo...

متن کامل

Research of Low Voltage Shore Power Supply Used on Shipping Based on Sliding Control

In order to solve the problem of fuel pollution, the diesel fuel for power generation of marine was abandoned and shore power supply have been proposed at the historic moment. The Shore Power Supply which needs transferring 380V/50Hz to 450V/60Hz is used on shipping who need this kind of power, so effectively curbs the emissions of pollution gas into the air, and achieves the purpose of improvi...

متن کامل

تحلیل عددی اثرات توزیع فشار هیدرودینامیکی بر روی شناور تندرو کامپوزیتی و بهینه‌سازی سازه شناور

In this research, hydrodynamic distribution pressure in continuous times is done and stress and displacement of a high speed vessel are studied. Hydrodynamic distribution pressure is studied for different dead rise angle according to vertical and horizontal vessel velocity at dry chine and wet time steps and is applied to vessel at continues times of vessel variable position. Vessel body is div...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Applied ergonomics

دوره 30 4  شماره 

صفحات  -

تاریخ انتشار 1999