A Quick Way to Find the Optimized Performance of a Power Constrained Logic Circuit
نویسنده
چکیده
Single-independent path (SIP) analysis is a quick and accurate method for estimating the optimized delay of a logic circuit as a function of power constraint. The technique is based on the realization that a certain class of networks, called SIP, can be easily and precisely optimized by analytic means and that other networks can be accurately approximated by a SIP network. SIP analysis optimizes gate sizes and handles both flat and hierarchical networks. Example results confirm the utility of the technique for a diverse range of applications including network selection, data path optimization, and BiCMOS versus CMOS comparison.
منابع مشابه
Optimized Standard Cell Generation for Static CMOS Technology
Fabrication of an integrated circuit with smaller area, besides reducing the cost of manufacturing, usually causes a reduction in the power dissipation and propagation delay. Using the static CMOS technology to fabricate a circuit that realizes a specific logic function and occupies a minimum space, it must be implemented with continuous diffusion runs. Therefore, at the design stage, an Euleri...
متن کاملOptimized Standard Cell Generation for Static CMOS Technology
Fabrication of an integrated circuit with smaller area, besides reducing the cost of manufacturing, usually causes a reduction in the power dissipation and propagation delay. Using the static CMOS technology to fabricate a circuit that realizes a specific logic function and occupies a minimum space, it must be implemented with continuous diffusion runs. Therefore, at the design stage, an Euleri...
متن کاملDevice and Circuit Performance Simulation of a New Nano- Scaled Side Contacted Field Effect Diode Structure
A new side-contacted field effect diode (S-FED) structure has beenintroduced as a modified S-FED, which is composed of a diode and planar double gateMOSFET. In this paper, drain current of modified and conventional S-FEDs wereinvestigated in on-state and off-state. For the conventional S-FED, the potential barrierheight between the source and the channel is observed to b...
متن کاملA Novel Algorithm to Find Maximum Power Point for Solar Systems under Partial Shading
In this paper, a new two-stage control algorithm to reach the maximum power point in photovoltaic (PV) systems under partially shaded conditions is presented. This algorithm tracks the maximum power point without any need to measure the open circuit voltage, short circuit current and making use of any extra switches. To achieve maximum power performance, the method firstly selects the relevant ...
متن کاملHigh Speed Full Swing Current Mode BiCMOS Logical Operators
In this paper the design of a new high-speed current mode BiCMOS logic circuits isproposed. By altering the threshold detector circuit of the conventional current mode logic circuitsand applying the multiple value logic (MVL) approach the number of transistors in basic logicoperators are significantly reduced and hence a reduction of chip area and power dissipation as wellas an increase in spee...
متن کامل