Formation of alternating interfacial layers in Au-12Ge/Ni joints

نویسندگان

  • Shih-kang Lin
  • Ming-yueh Tsai
  • Ping-chun Tsai
  • Bo-hsun Hsu
چکیده

Au-Ge alloys are promising materials for high-power and high-frequency packaging, and Ni is frequently used as diffusion barriers. This study investigates interfacial reactions in Au-12Ge/Ni joints at 300 °C and 400 °C. For the reactions at 300 °C, typical interfacial morphology was observed and the diffusion path was (Au) + (Ge)/NiGe/Ni5Ge3/Ni. However, an interesting phenomenon--the formation of (Au,Ni,Ge)/NiGe alternating layers - was observed for the reactions at 400 °C. The diffusion path across the interface was liquid/(Au,Ni,Ge)/NiGe/· · ·/(Au,Ni,Ge)/NiGe/Ni2Ge/Ni. The periodic thermodynamic instability at the NiGe/Ni2Ge interface caused the subsequent nucleation of new (Au,Ni,Ge)/NiGe pairs. The thermodynamic foundation and mechanism of formation of the alternating layers are elaborated in this paper.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Surface Finish of Substrate on Mechanical Reliability of in-48SN Solder Joints in Moems Package

Interfacial reactions and shear properties of the In-48Sn (in wt.%) ball grid array (BGA) solder joints after bonding were investigated with four different surface finishes of the substrate over an underlying Cu pad: electroplated Ni/Au (hereafter E-NG), electroless Ni/immersion Au (hereafter ENIG), immersion Ag (hereafter I-Ag) and organic solderability preservative (hereafter OSP). During bon...

متن کامل

Effects of Solder Volume on Formation and Redeposition of Au-Containing Intermetallics in Ni/Au-SnAgCu-Ni(P) Solder Joints

SnAgCu is one of the most promising candidates for lead-free solders to replace conventional eutectic SnPb solders. The effects of solder volume on interfacial reactions and microstructure evolution in Ni/Au-SnAgCu-Ni(P) solder joints have been investigated under soldering and thermal aging conditions. The results show that solder volume has a strong effect on the formation of Au-containing int...

متن کامل

Effects of the Gold Thickness of the Surface Finish on the Interfacial Reactions in Flip Chip Solder Joints

Chip Solder Joints Y. L. Lin, W. C. Luo, Y. H. Lin, C. E. Ho, and C. R. Kao Department of Chemical & Materials Engineering National Central University Jhongli City, Taiwan (*E-mail: [email protected] Phone/Fax: +886-3-4227382) Abstract The effects of Au thickness on the flip chip solder joints with the Cu/Ni/Al UBM on one end and the Au/Ni surface finish on another was studied. Two different th...

متن کامل

Effects of solder volume on formation and redeposition of Au- containing intermetallics in Au/Ni-SnAgCu-Ni(P) solder joints

SnAgCu is one of the most promising candidates for lead-free solders to replace conventional eutectic SnPb solders. The effects of solder volume on interfacial reactions and microstructure evolution in Au/Ni-SnAgCu-Ni(P) solder joints have been investigated under soldering and thermal aging conditions. The results show that solder volume has a strong effect on the formation of Au-containing int...

متن کامل

Cross-interaction of Interfacial Reactions in Ni (au/ni/cu)-snag-cu Solder Joints during Reflow Soldering and Thermal Aging

The coupling effect of interfacial reactions between two pads in Ni-SnAg-Cu and Au/Ni/Cu-SnAg-Cu solder joints was investigated in this paper. After reflow soldering, a large amount of Cu can diffuse across the solder joint to the opposite pad to form (Cu,Ni)6Sn5 IMC on the Ni pad in Ni-SnAg-Cu solder joint. A little Ni can also be detected in Cu6Sn5 layer, which contains some trapped solder, o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 4  شماره 

صفحات  -

تاریخ انتشار 2014