Application of Taguchi Approach in the Optimization of Cutting Parameters in Micro-Ultrasonic Drilling Process
نویسنده
چکیده
In the present research work, effect of several process parameters on the machining characteristics of borosilicate glass has been reported. The machining characteristics that are being investigated are material removal rate (MRR) and tool wear rate (TWR). Four different process parameters were considered for this study power rating of the machine, static load, slurry concentration and abrasive grit size. The optimal settings of parameters were determined through experiments using Taguchi method. The significant parameters were identified and their effects on MRR and TWR were studied. The analysis reveals that, in general, the MRR is most influenced by the static load while abrasive size mainly affects the TWR.
منابع مشابه
Application of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts
Face milling is an important and common machining operation because of its versatility and capability to produce various surfaces. Face milling is a machining process of removing material by the relative motion between a work piece and rotating cutter with multiple cutting edges. It is an interrupted cutting operation in which the teeth of the milling cutter enter and exit the work piece during...
متن کاملMultiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory
Electric discharge drill machine (EDDM) is a spark erosion process to produce micro-holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the electric discharge drilling machine, it is very necessary to study the process parameters of machine tool. In this research paper, a brass rod 2 mm diameter...
متن کاملA new approach to enhance final surface quality in drilling operation: evaluation of using alumina micro-particle additives on oil-water emulsion cutting fluid
Reaming is a common finishing process for improving the drilled holes surface quality. Choosing an appropriate finishing method in drilling process has a significant effect on the surface quality of holes and in decreasing the process total cost and time. In this study, four similar holes were drilled on the AISI 4340 workpiece with different two pair feed rates. The drilling process was perfor...
متن کاملUsing Gray Relational Analysis and Taguchi Technique in Solving Multi-objective Problems for Turning Operation of Austenitic Stainless Steel
In this study, the application of gray relational analysis (GRA) and Taguchi method in multi-criteria process parameters selection of turning operation has been investigated. The process responses under study are material removal rate (MRR) and surface roughness (SR); in turn, the input parameters include cutting speed, feed rate, depth of cut and nose radius of the cutting tool. The proposed a...
متن کاملExperimental Investigation and Optimizing Geometrical Characteristics and Surface Quality in Drilling of AISI H13 Steel
The aim of this paper is to investigate and optimize surface quality and geometrical characteristics in drilling process of AISI H13 steel, because they are critical items for precision manufacturing. After conducting the experiments, two regression models are developed to extensively evaluate the effect of drilling parameters on process outputs. After that, evolutionary multi-objective optimiz...
متن کامل