Revisiting Eurocode 8 Formulae for Periods of Vibration and Their Employment in Linear Seismic Analysis
نویسندگان
چکیده
The period of vibration is a fundamental parameter in the force-based design of structures as this parameter defines the spectral acceleration and thus the base shear force to which the building should be designed. This paper takes a critical look at the way in which seismic design codes around the world have allowed the designer to estimate the period of vibration for use in both linear static and dynamic analysis. Based on this review, some preliminary suggestions are made for updating the clauses related to the estimation of the periods of vibration in Eurocode 8.
منابع مشابه
Stochastic analysis of two adjacent structures subjected to structural pounding under earthquake excitation
Seismic pounding occurs as a result of lateral vibration and insufficient separation distance between two adjacent structures during earthquake excitation. This research aims to evaluate the stochastic behavior of adjacent structures with equal heights under earthquake-induced pounding. For this purpose, many stochastic analyses through comprehensive numerical simulations are carried out. About...
متن کاملAssessment of Structure-Specific Fragility Curves for Soft Storey Buildings Implementing IDA and SPO Approaches
Soft storey building is popular due to the functional and aesthetic purpose, despite its weakness in resisting seismic excitation. Nonlinear Static (Pushover) Analysis (POA) is a time saving and simple assessment procedure prosposed in Eurocode 8 (EC8). However, its reliability in designing structure still remains a question. At the first stage, seismic performance of several building models us...
متن کاملA Rational Approach for Fundamental Period of Low and Medium Rise Steel Building Frames
The fundamental periods of buildings are essential to calculate the design base shear and lateral forces. Most seismic codes specify empirical formulae to estimate the fundamental vibration period of buildings. These empirical formulae are used for both lowand mediumrise buildings. These formulae depend on the building materials (steel, reinforced concrete etc), building types (frame, shear wal...
متن کاملAn Intensity Measure for Seismic Input Energy Demand of Multi-Degree-of-Freedom Systems
Nonlinear dynamic analyses are performed to compute the maximum relative input energy per unit mass for 21 multi-degree-of-freedom systems (MDOF) with preselected target fundamental periods of vibration ranging from 0.2 to 4.0 s and 6 target inter-story ductility demands of 1, 2, 3, 4, 6, 8 subjected to 40 the earthquake ground motions. The efficiency of the several intensity measures as an ind...
متن کاملA new method for drawing the capacity spectrum for seismic analysis and structural rehabilitation
A review of previous studies shows that there are two general views on how to determine demand in structures through incremental nonlinear static analysis. In the first view, multi-modal methods are used to determine demand in structures. In this view, the applied load pattern is applied to the structure according to the shape of each vibration mode, assuming that the structure deformation foll...
متن کامل