DC Bus Voltage Control for a Distributed Power System

نویسندگان

  • Per Karlsson
  • Jörgen Svensson
چکیده

This paper addresses voltage control of distributed dc power systems. DC power systems have been discussed as a result of the introduction of renewable, small-scale power generation units. Also, telecommunication power systems featuring UPS properties might benefit from a broader introduction of dc power systems. Droop control is utilized to distribute the load between the source converters. In order to make the loading of the source converters equal, in per unit, the voltage control algorithm for each converter has to be designed to act similar. The dc side capacitor of each converter, needed for filtering, is also determined as a consequence. The root locus is investigated for varying dc bus impedance. It is found that the risk of entering converter over-modulation is a stronger limitation than stability, at least for reasonable dc bus cable parameters. The stationary and dynamic properties during load variations are also investigated.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Operation and Control of Hybrid Fuel Cell/ Energy Storage Distributed Power Generation System during voltage Sag Conditions

This paper presents a control strategy for fuel cell/energy storage power generation system during voltage sag conditions. The hybrid DC power sources are connected to grid using power electronic converters include DC-DC converter and grid connected voltage source inverter. The power from hybrid power sources is controlled during voltage sag by designing of control strategy for DC-DC converter....

متن کامل

Operation and Control of Hybrid Fuel Cell/ Energy Storage Distributed Power Generation System during voltage Sag Conditions

This paper presents a control strategy for fuel cell/energy storage power generation system during voltage sag conditions. The hybrid DC power sources are connected to grid using power electronic converters include DC-DC converter and grid connected voltage source inverter. The power from hybrid power sources is controlled during voltage sag by designing of control strategy for DC-DC converter....

متن کامل

A Distributed Control Architecture for Autonomous Operation of a Hybrid AC/DC Microgrid System

Hybrid AC/DC microgrids facilitate the procedure of DC power connection into the conventional AC power system by developing the distributed generations (DGs) technologies. The conversion processes between AC and DC electrical powers are more convenient by hybrid systems. In this paper, an energy management system (EMS) for a hybrid microgrid network is proposed due to the optimal utilization of...

متن کامل

Control‌-Strategies-for-Performance-Assessment-of-an- Autonomous Wind Energy Conversion System

Renewable energy sources like wind, sun, and hydro are considered as a reliable alternative to the traditional energy sources such as oil, natural gas, or coal. This paper describes modeling and simulations to determine a method for the power performance evaluation of autonomous wind turbine system. A speed control regulator is utilized to control the DC bus voltage. The inverter gate’s signals...

متن کامل

BIC based on Modified Droop Control of Hybrid AC/DC Microgrid with PV/Wind/ESS under Variable Generation and Load Conditions

The idea of a microgrid is created by utilizing more diverse ac or dc distributed generation (DG) sources along with an energy storage system (ESS) and loads. The most efficient and reliable selection of ac and dc microgrids is a hybrid ac/dc microgrid. The hybrid microgrid largely overcomes the shortcomings of standalone ac or dc microgrids. A bidirectional interlinking converter (BIC) is util...

متن کامل

Implementation of Optimal Load Balancing Strategy for Hybrid Energy Management System in DC/AC Microgrid with PV and Battery Storage

The proposed paper presents the DC/AC microgrid modeling using the Energy storage units and photovoltaic (PV) panels. The modal consists of a two stage power conversion. The power is supplied to the both DC and AC loads by this PV solar panels. The suitable way to explore the PV generation model is by using manufacturer datasheet. A bidirectional converter is connected to the battery storage sy...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009