2 Lightweight - Aggregate Concretes in Compression

نویسندگان

  • Thorsten Faust
  • Gert König
چکیده

One research field in Leipzig deals with the design of high strength lightweight-aggregate concretes (HSLWAC). Due to the huge waveband of this concretes with all possible combinations of lightweight-aggregates and mortar matrix the formulation of general rules is difficult. Therefore both components lightweight-aggregates and mortar matrix will be investigated in detail in order to achieve a deeper understanding of the internal stress transfer and the failure mechanisms. Moreover the results of the components tests serve as input data for a computer simulation. This instrument should support the prediction and optimization of the compressive strength of LWAC.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Durability of Self-compacting Lightweight Aggregate Concretes (LWSCC) as Repair Overlays

For rehabilitation of damaged concrete structures, the durability of repair overlay is a very important issue. Self-compacting concretes (SCC) are known as a suitable repair overlay materials. In this study, the durability of different self-compacting lightweight aggregate concretes (LWSCC) and effect of lightweight aggregate type on them is investigated. 3 mix designs of LWSCC containing three...

متن کامل

Scaling resistance of high performance concretes containing a small portion of pre-wetted lightweight fine aggregate

The subject of the investigation was the influence of pre-wetted lightweight aggregate on damage of the concrete surface due to cyclic freezing and thawing in the presence of de-icing salts tested according to the Swedish Standard SS 13 72 44 (the Borås method). Six series of concrete specimens were made with the same water/binder (w/b) ratio 0.32, cement volume 400 kg/m and content of superpla...

متن کامل

Flashag – New Lightweight Aggregate for High Strength and Durable Concrete

A new patented lightweight aggregates is tested. This type is given the name Flashag. The only solid raw material used to manufacture these aggregates is fly ash. The aggregates are sintered but not pelletized and the process is easy and inexpensive. This paper describes these patented aggregates and compares them with other lightweight and normal-weight aggregates that are used for concrete. T...

متن کامل

Using Waste Marbles in Self Compacting Lightweight Concrete

Abstract—In this study, the effects of waste marbles as aggregate material on workability and hardened concrete characteristics of self compacting lightweight concrete are investigated. For this purpose, self compacting light weight concrete are produced by waste marble aggregates are replaced with fine aggregate at 5%, 7.5%, and 10% ratios. Fresh concrete properties, slump flow, T50 time, V fu...

متن کامل

Prediction of Lightweight Aggregate Concrete Compressive Strength

Nowadays, the better performance of lightweight structures during earthquake has resulted in using lightweight concrete more than ever. However, determining the compressive strength of concrete used in these structures during their service through a none-destructive test is a popular and useful method.  One of the main methods of non-destructive testing in the assessment of compressive strength...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1992