A Second-Order All-Digital TDC with Low-Jitter Frequency Shift Oscillators and Dynamic Flipflops
نویسندگان
چکیده
We present a small-area second-order all-digital time-todigital converter (TDC) with two frequency shift oscillators (FSOs) comprising inverter chains and dynamic flipflops featuring low jitter. The proposed FSOs can maintain their phase states through continuous oscillation, unlike conventional gated ring oscillators (GROs) that are affected by transistor leakage. Our proposed FSOTDC is more robust and is eligible for all-digital TDC architectures in recent leaky processes. Low-jitter dynamic flipflops are adopted as a quantization noise propagator (QNP). A frequency mismatch occurring between the two FSOs can be canceled out using a least mean squares (LMS) filter so that second-order noise shaping is possible. In a standard 65-nm CMOS process, an SNDR of 61 dB is achievable at an input bandwidth of 500 kHz and a sampling rate of 16 MHz, where the respective area and power are 700 μm2 and 281 μW. key words: ADC, TDC, oscillator, digital circuit, adaptive LMS filtering
منابع مشابه
A 61-dB SNDR 700 µm2 second-order all-digital TDC with low-jitter frequency shift oscillators and dynamic flipflops
Abstract We present a small-area second-order all-digital time-to-digital converter (TDC) with two frequency shift oscillators (FSOs) comprising inverter chains and dynamic flipflops featuring low jitter. The proposed FSOs can maintain their phase states through continuous oscillation, unlike conventional gated ring oscillators (GROs) that are affected by transistor leakage. Our proposed FSOTDC...
متن کاملA Temperature-to-Digital Converter for a MEMS-Based Programmable Oscillator With < ±0.5-ppm Frequency Stability and < 1-ps Integrated Jitter
MEMS-based oscillators offer a silicon-based alternative to quartz-based frequency references. Here, a MEMS-based programmable oscillator is presented which achieves better than 0.5-ppm frequency stability from 40 C to 85 C and less than 1-ps (rms) integrated phase noise (12 kHz to 20 MHz). A key component of this system is a thermistor-based temperature-to-digital converter (TDC) which enables...
متن کاملA 148fsrms integrated noise 4MHz bandwidth all-digital second-order ΔΣ time-to-digital converter using gated switched-ring oscillator
This paper presents an all-digital second-order ΔΣ time-to-digital converter (TDC) by using switched-ring oscillator (SRO) and gated switched-ring oscillator (GSRO). Unlike conventional multi-stage noise-shaping (MASH) TDC using the SRO, the proposed TDC does not require complex calibration to compensate for the error from frequency difference between the SROs. The prototype TDC achieves 148fsr...
متن کاملPerformance Analysis Of Mono-bit Digital Instantaneous Frequency Measurement (Difm) Device
Instantaneous Frequency Measurement (IFM) devices are the essential parts of anyESM, ELINT, and RWR receiver. Analog IFMs have been used for several decades. However, thesedevices are bulky, complex and expensive. Nowadays, there is a great interest in developing a wideband, high dynamic range, and accurate Digital IFMs. One Digital IFM that has suitably reached allthese requirements is mono-bi...
متن کاملA 1.56GHz wide-tuning all digital FBAR-based PLL in 0.13µm CMOS
This paper presents the design rationale and measured results of a low power, low jitter, PVT-stable FBAR-based RF synthesizer implemented in 0.13μm CMOS. A digitally controlled FBAR oscillator, tuned with a switched-capacitor array, provides 5800ppm of frequency tuning, sufficient to cover a wide range of manufacturing and temperature variations of an FBAR. An all-digital phase-locked loop (AD...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Transactions
دوره 96-C شماره
صفحات -
تاریخ انتشار 2013