Simulation method for optimizing the performance of an integrated triboelectric nanogenerator energy harvesting system
نویسندگان
چکیده
0.1016/j.nanoen.2 lsevier Ltd. All rig uthor at: School a Institute of Tec . [email protected] Abstract Demonstrating integrated triboelectric nanogenerator energy harvesting systems that contain triboelectric nanogenerators, power management circuits, signal processing circuits, energy storage elements, and/or load circuits are core steps for practical applications of triboelectric nanogenerators. Through the design flow of such systems, theoretical simulation plays a critical role. In this manuscript, we provided a new theoretical simulation method for integrated triboelectric nanogenerator systems through integrating the equivalent circuit model of triboelectric nanogenerators into SPICE software. This new simulation method was validated by comparing its results with analytical solutions in some specific triboelectric nanogenerator systems. Finally, we employed this new simulator to analyze the performance of an integrated triboelectric nanogenerator system with a power management circuit. From the study of the influence of different circuit parameters, we outline the design strategy for such kind of triboelectric nanogenerator systems. & 2014 Elsevier Ltd. All rights reserved.
منابع مشابه
Highly transparent triboelectric nanogenerator for harvesting water-related energy reinforced by antireflection coating
Water-related energy is an inexhaustible and renewable energy resource in our environment, which has huge amount of energy and is not largely dictated by daytime and sunlight. The transparent characteristic plays a key role in practical applications for some devices designed for harvesting water-related energy. In this paper, a highly transparent triboelectric nanogenerator (T-TENG) was designe...
متن کاملTriboelectric nanogenerator for harvesting wind energy and as self-powered wind vector sensor system.
We report a triboelectric nanogenerator (TENG) that plays dual roles as a sustainable power source by harvesting wind energy and as a self-powered wind vector sensor system for wind speed and direction detection. By utilizing the wind-induced resonance vibration of a fluorinated ethylene-propylene film between two aluminum foils, the integrated TENGs with dimensions of 2.5 cm × 2.5 cm × 22 cm d...
متن کاملFreestanding triboelectric-layer-based nanogenerators for harvesting energy from a moving object or human motion in contact and non-contact modes.
For versatile mechanical energy harvesting from arbitrary moving objects such as humans, a new mode of triboelectric nanogenerator is developed based on the sliding of a freestanding triboelectric-layer between two stationary electrodes on the same plane. With two electrodes alternatively approached by the tribo-charges on the sliding layer, electricity is effectively generated due to electrost...
متن کاملSegmentally structured disk triboelectric nanogenerator for harvesting rotational mechanical energy.
We introduce an innovative design of a disk triboelectric nanogenerator (TENG) with segmental structures for harvesting rotational mechanical energy. Based on a cyclic in-plane charge separation between the segments that have distinct triboelectric polarities, the disk TENG generates electricity with unique characteristics, which have been studied by conjunction of experimental results with fin...
متن کاملTriboelectric nanogenerator built on suspended 3D spiral structure as vibration and positioning sensor and wave energy harvester.
An unstable mechanical structure that can self-balance when perturbed is a superior choice for vibration energy harvesting and vibration detection. In this work, a suspended 3D spiral structure is integrated with a triboelectric nanogenerator (TENG) for energy harvesting and sensor applications. The newly designed vertical contact-separation mode TENG has a wide working bandwidth of 30 Hz in lo...
متن کامل