Variation of Localized Nonlinear Acoustic Parameters around a Crack Tip by a Laser Doppler Vibrometry
نویسندگان
چکیده
A nonlinear acoustic effect is a sensitive tool to detect a micro-scale crack or early stage of cracking during the fatigue process. The damage produces a nonlinear stress-strain relationship, and the nonlinearity can be measured by a higher harmonic component in the frequency domain. The greater the damage, the larger the level of a nonlinearity, which can be used for the diagnosis of micro-cracks. The 2 harmonic component and higher harmonic components are measured using laser Doppler vibrometry. Because a laser beam can be focused to a small spot, localized nonlinear acoustic parameters can be determined. By scanning the laser beam, localized nonlinear acoustic parameters can be mapped around a crack in a CT (compact tension) specimen. Various nonlinear parameters are chosen and tested around the crack tip, and the most sensitive nonlinear parameter for a micro-crack or closed crack are optimized.
منابع مشابه
Influence of Grating Parameters on the Field Enhancement of an Optical Antenna under Laser Irradiation
In this study, a new approach for simulation of electric field enhancement ofplane wave laser around optical antenna was used to convert free-propagating opticalradiation to localized energy. A tapered gold tip design as a novel geometry of opticalantenna is introduced and numerically analyzed based on particle swarm optimization(PSO) by solving the Maxwell equations wit...
متن کاملOperational and defect parameters concerning the acoustic-laser vibrometry method for FRP-reinforced concrete
Acoustic-laser vibrometry, a non-contact method for nondestructive testing, was studied by altering operational and defect parameters to determine their effects on measured signatures and system performance. The method detects delamination and voids in fiber-reinforced polymer reinforced concrete by vibrating the material with an acoustic excitation and measuring the vibration signature with a ...
متن کاملIdentification of multiple cracks in composite beams using discrete wavelet transform
A method for the identification of multiple cracks based on Discrete Wavelet Transform is presented. The analysis is provided on beams made of polymeric laminate. The estimation of the crack locations is based on the evaluation of natural modal shapes of pre-cracked beams. The modal shapes were estimated experimentally using laser Doppler vibrometry. The dynamic response of multi-cracked beams ...
متن کاملNonlinear Volterra model of a loudspeaker behavior based on Laser Doppler Vibrometry
We demonstrate the capabilities of nonlinear Volterra models to simulate the behavior of an audio system and compare them to linear filters. In this paper a nonlinear model of an audio system based on Volterra series is presented and Normalized Least Mean Square algorithm is used to determine the Volterra series to third order. Training data for the models were collected measuring a physical sp...
متن کاملAcoustic-Laser Vibrometry for Standoff Detection of Defects in Materials
Standoff methods of non-destructive testing (NDT) offer flexibility over traditional methods of inspection which typically require physical contact with the material being measured. The benefits are that difficult to access locations can be inspected and measurements of a large area can be made more quickly. Acoustic-laser vibrometry is a robust standoff NDT technique for composite materials, s...
متن کامل