Charge carrier transport in molecularly doped polycarbonate as a test case for the dipolar glass model.
نویسندگان
چکیده
We present the results of Monte Carlo simulations of the charge carrier transport in a disordered molecular system containing spatial and energetic disorders using the dipolar glass model. Model parameters of the material were chosen to fit a typical polar organic photoconductor polycarbonate doped with 30% of aromatic hydrazone, whose transport properties are well documented in literature. Simulated carrier mobility demonstrates a usual Poole-Frenkel field dependence and its slope is very close to the experimental value without using any adjustable parameter. At room temperature transients are universal with respect to the electric field and transport layer thickness. At the same time, carrier mobility does not depend on the layer thickness and transients develop a well-defined plateau where the current does not depend on time, thus demonstrating a non-dispersive transport regime. Tails of the transients decay as power law with the exponent close to -2. This particular feature indicates that transients are close to the boundary between dispersive and non-dispersive transport regimes. Shapes of the simulated transients are in very good agreement with the experimental ones. In summary, we provide a first verification of a self-consistency of the dipolar glass transport model, where major transport parameters, extracted from the experimental transport data, are then used in the transport simulation, and the resulting mobility field dependence and transients are in very good agreement with the initial experimental data.
منابع مشابه
Field Dependent Charge Carrier Transport for Organic Semiconductors at the Time of Flight Configuration
In this paper, we used the time-of-flight (TOF) of a charge packet, that injected by a voltage pulse to calculate the drift velocity and mobility of holes in organic semiconducting polymers. The technique consists in applying a voltage to the anode and calculating the time delay in the appearance of the injected carriers at the other contact. The method is a simple way to determine the charge t...
متن کاملمقاومت الکتریکی حالت عادی ابررساناهای Y(Nd)-123 با آلایشهای CaTh و La بر اساس مدل جفتپلارونی
Polycrystalline samples of Y1-2xCaxThxBa2Cu3O7-δ (with 0.00 ≤x ≤ 0.075) and NdBa2-xLaxCu3O7-δ (with 0.0≤x≤ 0.30) were prepared by the standard solid state method. The transport and superconducting properties have been studied by the resistivity measurements as a function of temperature and doping concentration. Data of resistivity as a function of temperature was analyzed in terms of the bipola...
متن کاملProbing long-range carrier-pair spin–spin interactions in a conjugated polymer by detuning of electrically detected spin beating
UNLABELLED Weakly coupled electron spin pairs that experience weak spin-orbit interaction can control electronic transitions in molecular and solid-state systems. Known to determine radical pair reactions, they have been invoked to explain phenomena ranging from avian magnetoreception to spin-dependent charge-carrier recombination and transport. Spin pairs exhibit persistent spin coherence, all...
متن کاملN, S-Codoped TiO2/Fe2O3 Heterostructure Assemblies for Electrochemical Degradation of Crystal Violet Dye
In contemporary research, “Heterostructure” assemblies play an important role in energy conversion systems, wherein the composite assemblies facilitate faster charge carrier transport across the material interfaces. The improved/enhanced efficiency metrics in these systems (electro/photo-electrochemical processes/devices) is due to synergistic interaction and synchronized charge transport a...
متن کاملNumerical Study on Resistance of a Bulk Carrier Vessel Using CFD Method
Bulk carriers have an important role in international maritime transport. In this paper, we carried out a numerical study on a model of bulk carrier vessel and calculated total resistance of the model. A model of a bulk carrier vessel with length of 2.76 m, breadth of 0.403 m and draught of 0.173 m was selected for numerical modeling. Numerical work was done by commercial CFD software ANSY...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Journal of chemical physics
دوره 138 10 شماره
صفحات -
تاریخ انتشار 2013