THERMODYNAMIC CHARACTERIZATION OF SHAPE MEMORY Al- Ni-Fe ALLOYS USING FACTSAGE
نویسندگان
چکیده
Shape memory alloys have again appealed a lot in recent years as new special materials of unusual macroscopic features that make them interesting for study and research as well as for their multifunctional application in various branches of techniques. Shape memory refers to the ability of certain plastic metals and alloys to regain their original shape during the heating process due to complete or almost complete absence of deformation. Shape memory effect has been studied for many alloys, as well as for some pure metals. In this paper the results of the thermodynamic characterization of Al-Ni-Fe alloys will be given.
منابع مشابه
CALCULATION OF THERMODYNAMIC PROPERTIES OF Al-Fe, Al-Ni AND Ni-Fe ALLOYS USING FACTSAGE
Thermodynamic predicting analysis of three binary systems Al-Fe, Al-Ni and Ni-Fe are shown in this paper. Thermodynamic analysis involved calculation of activities, coefficient of activities, partial and integral values for enthalpies and Gibbs energies of mixing and excess energies at three different temperatures: 1873K, 1900K and 1973K, as well as calculated phase diagrams, for the investigat...
متن کاملFerromagnetic shape memory alloys: Alternatives to Ni–Mn–Ga
This paper intends to review the state-of-the-art in the field of ferromagnetic shape memory alloys different than Ni–Mn–Ga, developed in the ast years. It starts with the effects of additions of different fourth elements to Ni–Mn–Ga and continues with the review of other Heusler (or B2) i-based and Co-based alloy systems, like Ni–Mn–X, Ni–Fe–Ga, Co–Ni–Al and Co–Ni–Ga alloys. Finally, ferromagn...
متن کاملTRANSFORMATION BEHAVIOR OF NiTi SHAPE MEMORY ALLOYS TREATED BY THERMOMECHANICAL PROCESSING USING DSC
Abstract: In the present study the effect of thermomechanical treatment (cold work and annealing) on the transformation behavior of NiTi shape memory alloys was studied. Differential scanning calorimetry was used to determine transformation temperature and its relation to precipitates and defects. Three alloys including Ti-50.3at.% Ni, Ti-50.5at.% Ni (reclamated orthodontic wires) and 50.6at...
متن کاملProduction and Characterization of Stainless Steel Based Fe-Cr-Ni-Mn-Si(-CO) Shape Memory Alloys
It is well known that the Fe based alloys can exhibit shape memory effect due to the y to E martensitic transformation. The effect may not be as striking as observed in the NiTi alloy but it might become attractive fkom the practical point of view. In this work, two compositions of Fe-Cr-Ni-Mn-Si(-Co) stainless steel based shape memory alloy, prepared by the VIM technique, will be presented. Th...
متن کاملEFFECT OF ANODIC OXIDATION ON THE CORROSION BEHAVIOR OF NICKEL-TITANIUM SHAPE MEMORY ALLOYS IN SIMULATED BODY FLUIDS (SBF)
The effect of anodic oxidation of a NiTi shape memory alloy in sulfuric acid electrolyte on its surface characteristics was studied. Surface roughness was measured by roughness tester. Surface morphology was studied using optical microscopy (OM) and scanning electron microscopy (SEM). Corrosion behavior was specified by recording Potentiodynamic polarization cur...
متن کامل