Detailed 3D modelling of mass transfer processes in two phase flows with dynamic interfaces
نویسنده
چکیده
We developed a method that will enable us to determine mass transfer coefficients for a large number of two phase flow conditions based on numerical simulation. A three-dimensional direct numerical simulation based on the Front Tracking technique taking into account the mass transfer process was chosen for this purpose. The dissolved species concentration in the liquid phase is tracked using a scalar mass balance while the value of the concentration at the interface is determined via an immersed boundary technique. In the present study, simulations are carried out to investigate the effect of the bubble shape on the dissolved species concentration field.
منابع مشابه
Effects of coupling on turbulent gas-particle boundary layer flows at borderline volume fractions using kinetic theory
This study is concerned with the prediction of particles’ velocity in a dilute turbulent gas-solidboundary layer flow using a fully Eulerian two-fluid model. The closures required for equationsdescribing the particulate phase are derived from the kinetic theory of granular flows. Gas phaseturbulence is modeled by one-equation model and solid phase turbulence by MLH theory. Resultsof one-way and...
متن کاملAdvance Modelling and Simulation of Industrial Boilers
This paper presents some of the results of the simulation in the radiation section of an industrial boiler using an advanced mathematical model. Calculations are described for the flow, heat transfer, and chemical reaction processes occurring within a gas-fired cylindrical furnace. The calculation procedure is a two dimensional one in which the main hydrodynamic variables are the velocity and s...
متن کاملHeat Transfer Correlation for Two Phase Flow in a Mixing Tank
Mixing tanks equipped with mechanical stirrer are broadly applied in chemical and petrochemical industries, due to their variety of industrial process requirements. In this study, helical single blade mixer was designed applying CATIA and then mixing of fluid and solid particles, in a tank with this agitator was examined by OpenFOAM. For velocity distribution in the mixing tank, continuity, mom...
متن کاملTwo-phase Boundary Layer Flow, Heat and Mass Transfer of a Dusty Liquid past a Stretching Sheet with Thermal Radiation
The problem of two-phase MHD boundary layer flow, heat and mass transfer over a stretching sheet with fluid-particle suspension and thermal radiation has been studied. The effect of mass transfer in dusty fluid over a stretching sheet is considered for the first time. The governing equations are reduced to a set of non-linear ordinary differential equations under suitable similarity transforma...
متن کاملEffect of Inserting Coiled Wires in Tubes on the Fluid Flow and Heat Transfer Performance of Nanofluids
In the present study, numerical study of Al2O3-water nanofluid flow in different coiled wire inserted tubes are performed to investigate the effects of inserting coiled wires in tubes on the fluid dynamic and heat transfer performance ofv nanofluids. The numerical simulations of nanofluids are performed using two phase mixture model. The flow regime and the wall boundary conditions are assumed ...
متن کامل