Monitoring the Turmeric Finger Disease and Growth Characteristics Using Sensor Based Embedded System—A Novel Method

نویسندگان

  • Maheswaran Shanmugam
  • Asokan Ramasamy
  • Sivaranjani Paramasivam
  • Priyadharshini Prabhakaran
چکیده

In this cyber era, novelty plays a prime role in the field of agriculture that majorly depends on computer-based measurements and control. Herein before, it was totally controlled and performed by the agriculturists. One of the technological innovative methods to measure and monitor the turmeric finger growth characteristics is the embedded system that is based on sensor array module such as flex sensor, temperature sensor and pH sensor. The experimental work has been designed and tested with five set of nodes and the growth of turmeric finger is tenuously monitored by measuring the change in flex resistance. Out of five nodes, two nodes were diseased. Deliberately, one node was left as such and the other node was treated with natural pesticides (pseudomonas and viride) to restrict the rhizome rot disease attack. After cultivation, it was found that the rhizome rot disease attack on the node which was treated with pesticides was comparatively lesser than the other node. The five different nodes have been used in the experimental work with an average flex sensor resistance of 3.962 cm/kΩ. In a nutshell, this proposed method manifests the farmers to detect the rhizome rot disease at its earlier stage and to prevent it as well by screening the growth of the turmeric fingers when it is under the soil.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A case study for application of fuzzy inference and data mining in structural health monitoring

In this study, a system for monitoring the structural health of bridge deck and predicting various possible damages to this section was designed based on measuring the temperature and humidity with the use of wireless sensor networks, and then it was implemented and investigated. A scaled model of a conventional medium sized bridge (length of 50 meters, height of 10 meters, and with 2 piers) wa...

متن کامل

Online Monitoring for Industrial Processes Quality Control Using Time Varying Parameter Model

A novel data-driven soft sensor is designed for online product quality prediction and control performance modification in industrial units. A combined approach of time variable parameter (TVP) model, dynamic auto regressive exogenous variable (DARX) algorithm, nonlinear correlation analysis and criterion-based elimination method is introduced in this work. The soft sensor performance validation...

متن کامل

Design of High Sensitivity and Linearity Microelectromechanical Systems Capacitive Tire Pressure Sensor using Stepped Membrane

This paper is focused on a novel design of stepped diaphragm for MEMS capacitive pressure sensor used in tire pressure monitoring system. The structure of sensor diaphragm plays a key role for determining the sensitivity of the sensor and the non-linearity of the output.First the structures of two capacitive pressure sensors with clamped square flatdiaphragms, with different thicknesses are inv...

متن کامل

Design of Novel High Sensitive MEMS Capacitive Fingerprint Sensor

In this paper a new design of MEMS capacitive fingerprint sensors is presented. The capacitive sensor is made of two parallel plates with air gap. In these sensors, the capacitance changes is very important factor. It is caused by deformation of the upper electrode of sensor. In this study with making slots in upper electrode, using T-shaped protrusion on diaphragm in order to concentrate the f...

متن کامل

Disposable single-use electrochemical sensor: A novel hollow fiber based tool for environmental monitoring of cadmium

The objective of this study is to design a simple, fast, sensitive and single-use electrode with the simultaneous capability of preconcentration and measuring, for application in a three-electrode voltammetry system to identify and measure the heavy metal cadmium. The design process of this sensor consists of several stages. The polyurethane foam and multi walled carbon nanotubes nanoparticles ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016