STATCOM Modeling for Voltage and Angle Stability Studies
نویسندگان
چکیده
This paper proposes and validates models to accurately represent STATic Synchronous Shunt COMpensators (STATCOM) in voltage and angle stability studies of powers systems. The proposed STATCOM stability models are justified based on the basic operational characteristics of this Flexible AC Transmission System (FACTS) controller for both phase and PWM control strategies. These models are first validated by means of EMTP simulations on a test system, and then are implemented into two different programs used to study voltage and angle stability issues in the system. All details of the model implementation, the controls used, and the data for the test system are provided in the paper.
منابع مشابه
Modeling and Implementation of Tcr and Vsi Based Facts Controllers
This report concentrates on presenting transient stability and power ow models of Thyristor Controlled Reactor (TCR) and Voltage Sourced Inverter (VSI) based Flexible AC Transmission System (FACTS) Controllers. Appropriate models for voltage and angle stability studies are discussed in detail for the Static Var Compensator (SVC), the Thyristor Controlled Series Compensator (TCSC), the Static Va...
متن کاملControl of Synchronous Generator Excitation and Rotor Angle Stability by using Static Synchronous Compensator (STATCOM) with Reference Voltage Compensation (RVC) Simulation Method
The static synchronous compensator (STATCOM) is one type of FACTS devices which resembles in many respects a rotating synchronous condenser used for voltage control and reactive power compensation. The STATCOM can increase transmission capacity, damping low frequency oscillation, and improving transient stability. This paper investigated for the transient stability improvement by using static s...
متن کاملFast Transient Hybrid Neuro Fuzzy Controller for STATCOM During Unbalanced Voltage Sags
A static synchronous compensator (STATCOM) is generally used to regulate voltage and improve transient stability in transmission and distribution networks. This is achieved by controlling reactive power exchange between STATCOM and the grid. Unbalanced sags are the most common type of voltage sags in distribution networks. A static synchronous compensator (STATCOM) is generally used to maintain...
متن کاملModeling, Analysis and Simulation for Voltage Regulation of a Weak Bus System Using STATCOM
Abstract-The interconnected grids tend to become unstable as the heavy loads vary dynamically in their magnitude and phase angle and hence power factor. Commissioning new transmission systems are extremely expensive and take considerable amount of time to build up. Voltage regulation of a weak bus is a challenging problem, particularly when it may not be economic to simply upgrade the network. ...
متن کاملComparison of FACTS Devices for Two Area Power System Stability Enhancement using MATLAB Modelling
Received Mar 2, 2014 Revised Jul 10, 2014 Accepted Jul 3, 2014 Modern Power Transmission networks are becoming increasingly stressed due to growing demand and restrictions on building new lines. Losing stability is one of the major threat of such a stressed system following a disturbance. Flexible ac transmission system (FACTS) devices are found to be very effective in a transmission network fo...
متن کامل