Homs Effects in the Bepc Dc Separator
نویسندگان
چکیده
During the operation of BEPC, the cable isolation layer near the high voltage connector of the DC separator is often melted, which is probably caused by the HOMs power. This paper presents the measurement results of the HOMs shunt impedance, the calculation of the power dissipated in the separator and through the connector, and the analysis of the HOMs effects.
منابع مشابه
The Electron Cloud Instability Studies in Bepc*
The electron cloud instability (ECI) in the BEPC was studied systematically with experiments and simulations in recent years. Several electron cloud detectors have been installed into the BEPC storage ring to measure the electron yielding. The effects of solenoid, the clearing electrode, the chromaticity and the octupole on ECI have been investigated in BEPC experimentally. To evaluate the ECI ...
متن کاملGas Sensor Based on Large Hollow-Core Photonic Bandgap Fiber
One concern in using photonic band-gap fiber (PBGF) as a gas sensor is the response time. In this type of the gas sensors, response time is the time required for gas to diffuse into the hollow-core. So considering a large hollow-core PBGF (HC-PBGF), the response time can be significantly reduced. But in the large HC-PBGF, the fundamental issue is the presence of higher order modes (HOMs). Somet...
متن کاملClimate-Responsive Architecture for the Residential Houses of Homs: A Comparison of Traditional and Contemporary Houses
Given that high energy consumption in residential buildings is one of the main problems in Syria, applying criteria for a climate-responsive building design is one of the most important ways to reduce energy consumption. This article seeks to study and compare the historical and contemporary residential buildings of the city of Homs and extract the positive and negative aspects of each. The mai...
متن کاملMeasurement of in-plane thermal conductivity and heat capacity of separator in Li-ion cells using a transient DC heating method
The separator is a critical, multi-functional component of a Li-ion cell that plays a key role in performance and safety during energy conversion and storage processes. Heat flow through the separator is important for minimizing cell temperature and avoiding thermal runaway. Despite the critical nature of thermal conduction through the separator, very little research has been reported on unders...
متن کاملEnhanced wettability and electrolyte uptake of coated commercial polypropylene separators with inorganic nanopowders for application in lithium-ion battery
In this research, inorganic material type and content influence on coating of commercially available polypropylene (PP) separator were studied for improving its performance and safety as lithium ion battery separator. Heat-resistant nanopowders of Al2O3, SiO2 and ZrO2 were coated using polyvinylidene fluoride (PVDF) binder. Coating effects on the separators morphology, wettability, high tempera...
متن کامل