Robust Control Design for Quad Tilt-Wing UAV
نویسندگان
چکیده
This paper describes the design method of a flight control system of a Quad Tilt-Wing (QTW) Unmanned Aerial Vehicle (UAV). A QTW-UAV is necessary to design a controller considering its nonlinear dynamics because of the appearance of the nonlinearity during transition flight between hovering and level flight. A design method of a flight control system using Dynamic Inversion (DI) that is one of linearization method has been proposed for the UAV. However, the design method based on an accurate model has a possibility of deterioration of control performance and system stability. Therefore, we propose a flight control system that considers uncertainties such as modeling error and disturbances by applying an H-infinity controller to the linearized system. The validity of the proposed control system is verified through numerical simulation and experiment.
منابع مشابه
Quad Tilt Wing VTOL UAV: Aerodynamic Characteristics and Prototype Flight
A QTW VTOL UAV, featured tandem tilt wings and propellers mounted at the mid-span of each wing, is one of the most promising UAV configurations having both a VTOL capability and high cruise performance. A small prototype QTW UAV has been constructed to prove the concept and full transition between vertical and horizontal flight has been successfully demonstrated under remote manual control. The...
متن کاملDesign and construction of a novel quad tilt-wing UAV
This paper presents aerodynamic and mechanical design, prototyping and flight control system design of a new unmanned aerial vehicle SUAVI (Sabanci University Unmanned Aerial VehIcle). SUAVI is an electric powered quad tilt-wing UAV that is capable of vertical takeoff and landing (VTOL) like a helicopter and long duration horizontal flight like an airplane. Aerodynamic and mechanical designs ar...
متن کاملTransition Flight of Quad Tilt Wing Vtol Uav
The QTW VTOL UAV, which features tandem tilt wings with propellers mounted at the mid-span of each wing, is one of the most promising UAV configurations, having both VTOL capability and high cruise performance. A six-degree-of-freedom dynamic simulation model covering the full range of the QTW flight envelope was developed and a flight control system including a transition schedule and a stabil...
متن کاملHovering Flight Improvement of a Quad-rotor Mini UAV Using Brushless DC Motors
This paper present the design of a novel embedded control system for improving attitude stabilization of a quad-rotor mini UAV. The control strategy uses low cost components and includes an extra control loop based on motor armature current feedback. This additional control loop significantly improves the performance of the quad-rotor attitude stability. This technique results in a controller t...
متن کاملPreliminary Design of a Tandem-Wing Tail-Sitter UAV Using Multi-Disciplinary Design Optimisation
The optimisation of a tail-sitter UAV (Unmanned Aerial Vehicle) that uses a stall-tumble manoeuvre to transition from vertical to horizontal flight and a pull-up manoeuvre to regain the vertical is investigated. The tandem wing vehicle is controlled in the hover and vertical flight phases by prop-wash over wing mounted control surfaces. It represents an innovative and potentially simple solutio...
متن کامل