Advanced Heat Sink Material for Fusion Energy Devices
نویسندگان
چکیده
منابع مشابه
Effect of Using Nano Encapsulated Phase Change Material on Thermal Performance of Micro Heat Sink
The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...
متن کاملTransient cooling of electronics using phase change material (PCM)-based heat sinks
Use of a phase change material (PCM)-based heat sink in transient thermal management of plastic quad flat package (QFP) electronic devices was investigated experimentally and numerically. Results show that increased power inputs enhance the melting rate as well as the thermal performance of the PCM-based heat sinks until the PCM is fully melted. A three-dimensional computational fluid dynamics ...
متن کاملAn experimental assessment of nanostructured materials embedded in a PCM-based heat sink for transient thermal management of electronic
In the present paper, an experimental assessment was performed on the transient thermal performance of a heat sink filled by a phase change material (PCM) and PCM embedded with carbon nanofibers (CNFs) and titania (TiO2) nanoparticles as nanostructured materials. In order to enhance the thermal conductivity of PCM, CNFs and TiO2 nanoparticles at different loadings (0.5wt. % and 2 wt.% of CNFs a...
متن کاملProgress of High Heat Flux Component Manufacture and Heat Load Experiments in China
High heat flux component manufacture is the critical technology for the current fusion experimental devices and fusion reactors in the future since it will face fusion plasma directly and endure high flux particle irradiation and huge heat deposition from core plasma. Be/CuCuZr/ss, W/CuCrZr and CFC/CuCrZr modules have been selected as the high heat flux components for ITER first wall and divert...
متن کاملThermal Interface Materials used for Improving the Efficiency and Power Handling Capability of Electronic Devices: A Review
Thermal interface material (TIM) is used to enhance heat flow by reducing thermal resistance across the thermal interface between the heat source and the heat sink, and to minimize the variance of the interface resistance as compared to just surface-tosurface contact. In this mini review, the recent developments in the thermal properties of various used and advanced thermal interface materials ...
متن کامل