Rapid Control Prototyping Applications using TI C2000 DSP
نویسندگان
چکیده
The paper presents two rapid control prototyping applications: velocity control of a DC motor and adaptive system identification and control of an automotive alternator. The control algorithms for the applications run on a TMS320F2812 DSP. Once the desired functionality has been captured and simulated, using MATLAB/Simulink/Embedded Target for Texas Instruments (TI) C2000 DSP environment can be generated code for the DSP. All task assignments to processor are automatically made by the software. Key-Words: Embedded Target, DSP, DC motor, Rapid control prototyping, Digital Signal Controller, Matlab/Simulink.
منابع مشابه
Rapid Development of Real-Time Applications Using MATLAB/Simulink on TI C6000-based DSP
This work discusses a hardware/software platform for educational purpose which integrates MATLAB/Simulink, Texas Instruments (TI) eXpressDSP Tools and C6000 digital signal processing (DSP) target let develop and validate digital signal processing designs from concept through code, in a typical professional vision design-simulation-implementation. This platform automates rapid prototyping on C60...
متن کاملDigital Control Applications using TI Digital Signal Controller
Two digital control applications are presented: velocity control of a DC motor and adaptive system identification and control of an automotive alternator. A tuning method is proposed for DC motors. Experimental application for the DC motor illustrates the effectiveness and the simplicity of the proposed method for controller design. Using adaptive system identification, an automotive alternator...
متن کاملDSP Control of Gyrator-Behaved Switch Mode Converter
Recent advances in DSP technology, such as those found in the TI C2000 family, make possible the practical exploration and eventual economical implementation of switch mode converters topologies that, until now, were conceived as a curiosity or at best, of theoretical value only. Applying the DSP capabilities, we explored in this study the characteristics and advantages of a double-bridge, Gyra...
متن کاملA RAPID-PROTOTYPING SYSTEM BASED ON STANDARD PCs WITH RTAI AS REAL-TIME OPERATING SYSTEM
Standard rapid-prototyping systems for real-time applications are usually equipped with x86-based PCs for software development and additional DSP processors to do the real-time work. Using a DSP always requires tools and compilers which in most cases must be purchased and are licensed by the vendor of the DSP, increasing the cost of the system. This paper presents a rapid-prototyping system bas...
متن کاملRapid prototyping system for teaching real-time digital signal processing
A low-cost rapid-prototyping system using Texas Instruments' (TI) TMS320C30 Evaluation Module (EVM) based on the MathWorks' development software is presented in this paper. The rapid prototyping system serves as an educational tool in learning digital signal processing (DSP) and seeing the concept realized in real time. The development software modules, Simulink, uses graphical block diagrams t...
متن کامل