Analysis of the Vibration Signal Using Time-frequency Methods
نویسندگان
چکیده
Condition monitoring (CM) is an essential technique used for monitoring various systems and system components and is supplemented with other techniques, such as video monitoring. Due to the fact that the acceleration signal is suitable for acquisition and is of non-stationary nature, CM is used to monitor various parameters of a monitored system. In order to process the acquired vibration signal and draw valid conclusions a time-frequency analysis has to be performed. In this paper, the advantage of the wavelet application is shown with an example and manifolds of wavelets reported in this application are reviewed. The case study implies that the optimal wavelets are db8 and db7 and the optimal level of decomposition is the fifth level.
منابع مشابه
Real-time damage detection of bridges using adaptive time-frequency analysis and ANN
Although traditional signal-based structural health monitoring algorithms have been successfully employed for small structures, their application for large and complex bridges has been challenging due to non-stationary signal characteristics with a high level of noise. In this paper, a promising damage detection algorithm is proposed by incorporation of adaptive signal processing and Artificial...
متن کاملFault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal
The aim of this work is the application of the phase variation in vibration signal for fault detection on rotating machines. The vibration signal from the machine is modulated in amplitude and phase around a carrier frequency. The modulating signal in phase is determined after the Hilbert transform and is used, with the Fast Fourier Transform, to extract the harmonics spectrum in phase. This me...
متن کاملOrder analysis of serpentine belt transverse vibration
Transverse vibration of the serpentine belt is effective at noise and durability of it. Therefore, understanding of this phenomenon and studying effective parameters can be used in the process of reducing belt noise and increasing life time. In this paper, transverse vibration of serpentine belt is measured experimentally and analyzed. In the implementation test steps, the displacement of the b...
متن کاملImproved Knock Detection Method Based on New Time-Frequency Analysis In Spark Ignition Turbocharged Engine
Premature combustion that affects outputs, thermal efficiencies and lifetimes of internal combustion engine is called “knock effect”. However knock signal detection based on acoustic sensor is a challenging task due to existing of noise in the same frequency spectrum. Experimental results revealed that vibration signals, generated from knock, has certain frequencies related to vibration resonan...
متن کاملEvaluation of Dynamic Characteristics of Marun Embankment Dam Using Ambient Vibration Test and FEM
There is a worldwide interest in the proper design of embankment dams to resist earthquake loadings. For the first time in Iran, a complete ambient vibration survey due to low-level loads such as wind, machinery activities, low level tectonic activities, and water exit from bottom outlet was performed on Marun embankment dam. These kinds of ambient vibration tests are suitable for manifesting t...
متن کاملEvaluation of Dynamic Characteristics of Marun Embankment Dam Using Ambient Vibration Test and FEM
There is a worldwide interest in the proper design of embankment dams to resist earthquake loadings. For the first time in Iran, a complete ambient vibration survey due to low-level loads such as wind, machinery activities, low level tectonic activities, and water exit from bottom outlet was performed on Marun embankment dam. These kinds of ambient vibration tests are suitable for manifesting t...
متن کامل