Characteristics of acoustic emission during single diamond scratching of granite
نویسنده
چکیده
The acoustic emission (AE) measured during single diamond scratching of granite can provide valuable information about the structural composition and sawability of natural stone material. As described by Prof. Dr.-Ing. R. Clausen*, Dr, C.Y. Wang** and Dr,-Ing, M. Meding***, scratching tests are shown to i ndicate a direct relationship between the characteristics of AE generated by scoring, the properties of the stone material and the cutting depth. The results can be explained by the fracture mechanism at work during the cutting of stone.
منابع مشابه
Sawability prediction of carbonate rocks from shear strength parameters using artificial neural networks
Circular sawing with diamond-impregnated tools has been extensively used in stone processing plants and prediction of rock sawability is important in the cost estimation and the planning of the plants. Rock sawability depends on machine characteristics, type and diameter of diamond saw, depth of cut, rate of sawing and tool wear, and rock properties. Some researchers have investigated the relat...
متن کاملCharacteristics of Acoustic Emission Signals in Machining Using Diamond Coated Tools
Diamond coated cutting tools have been pursued as a costeffective substitute to brazed polycrystalline diamond (PCD) tools in applications such as machining high-strength and lightweight materials. However, coating delamination has been known as the major failure mode of diamond coated tools, which terminates tool life prematurely. Once delamination failure occurs, the tool substrate often subj...
متن کاملCluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE)
Due to the extensive use of composites in various industries and the fact that defects reduce ultimate strength and efficiency during operation, detection of failures in composite parts is very important. The aim of this paper is to use Acoustic Emission (AE) non-destructive method in four-point bending test of carbon/epoxy composite to analyze and examine the failure mechanisms. This method is...
متن کاملDamage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method
In this study, the longitudinal and hoop tensile strengths of an industrial ±55° Glass Reinforced Epoxy (GRE) pipe with eighteen layers as well as the associated failure mechanisms are determined. To obtain the longitudinal and hoop tensile strengths values, three specimens are cut from the studied GRE pipe in each direction. A comparison is done between both the strength values, and the fractu...
متن کاملStudy of Damaged Zone around Circular Opening Using Acoustic Emission Technique
One of the methods used to investigate the damaged zone in rock structure is the acoustic emission method. This method is based on receiving the elastic waves that are produced by deformation and cracking of the rock mass around the underground excavation. In this research, a study is conducted on the rock samples by a numerical method to investigate the damaged zone caused by the excavat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002