Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature.

نویسندگان

  • J J Kim
  • Y Choi
  • S Suresh
  • A S Argon
چکیده

It is known that nanocrystallites can form in shear bands produced during severe bending or high-energy ball milling of thin ribbons of a metallic glass. We present direct experimental evidence that highly confined and controlled local contact at the ultrafine scale in the form of quasi-static nanoindentation of a bulk glassy metal alloy at room temperature can also cause nanocrystallization. Atomic force microscopy and transmission electron microscopy show that nanocrystallites nucleate in and around shear bands produced near indents and that they are the same as crystallites formed during annealing without deformation at 783 kelvin. Analogous to results from recent experiments with glassy polymers, our results are reasoned to be a consequence of flow dilatation inside the bands and of the attendant, radically enhanced, atomic diffusional mobility inside actively deforming shear bands.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of strain rate on the formation of nanocrystallites in an Al-based amorphous alloy during nanoindentation

The effect of deformation by nanoindentation on nanocrystallization in amorphous Al90Fe5Gd5 was investigated by transmission electron microscopy. Massive precipitation of nanocrystallites is observed within the indents. Under the quasistatic condition used, a temperature rise due to adiabatic heating is likely negligible, confirming that plastic deformation can induce crystallization without a ...

متن کامل

NANOCRYSTALLIZATION MECHANISMS OF Fe52Cr18Mo7B16C4Nb3 BULK AMORPHOUS STEEL

Crystallization kinetics of Fe52Cr18Mo7B16C4Nb3 alloy was evaluated using X-ray diffraction, differential scanning calorimetric (DSC) tests and TEM observations in this research work. In effect, crystallization and growth mechanisms were investigated using DSC tests in four different heating rates (10, 20, 30, 40 K/min) and kinetic models (i.e. Kissinger- Starink, Ozawa, and Matusita methods). ...

متن کامل

KINETICS OF -Fe NANOCRYSTALLIZATION IN Fe55Cr18Mo7B16C4 BULK AMORPHOUS ALLOY

Abstract: In this research work, crystallization kinetics of Fe55Cr18Mo7B16C4 alloy was evaluated by X-ray diffraction, TEM observations and differential scanning calorimetric tests. In practice, crystallization and growth mechanisms were investigated using DSC tests in four different heating rates. Results showed that a two -step crystallization process occurred in the alloy in which - Fe phas...

متن کامل

Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons

The nanocrystallization of Co67Fe4Cr7Si8B14 amorphous ribbons which prepared by planar flow melt spinning process (PFMS) was investigated. Crystallization of the ribbons was studied by differential thermal analysis (DTA), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The DTA result of amorphous ribbon at heating rate of 10˚C/min showedoccurrence of phase transitions in two...

متن کامل

Imprinting bulk amorphous alloy at room temperature

We present investigations on the plastic deformation behavior of a brittle bulk amorphous alloy by simple uniaxial compressive loading at room temperature. A patterning is possible by cold-plastic forming of the typically brittle Hf-based bulk amorphous alloy through controlling homogenous flow without the need for thermal energy or shaping at elevated temperatures. The experimental evidence su...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Science

دوره 295 5555  شماره 

صفحات  -

تاریخ انتشار 2002