Determination of Fluoride in Plant Material using Microwave Induced Oxygen Combustion
نویسندگان
چکیده
Šucman E., Bednář J. (2012): Determination of fluoride in plant material using microwave induced oxygen combustion. Czech J. Food Sci., 30: 438–441. Fluorine is essential in human and/or animal nutrition, thus it is important to know its concentration in a diet. One of the important sources of fluorine for humans is tea, containing relatively high amounts of this trace element. A method for fluoride determination in various kinds of tea using microwave supported sample preparation in a high pressure oxygen atmosphere followed by potentiometry with a fluoride ion-selective electrode were described. The parameters of the microwave device for such combustion procedure were checked and optimised in order to find settings ensuring complete sample combustion and/or absorption of the analyte in the absorption solution. For the ionselective electrode measurement, the technique of standard addition was chosen. The Nernstian slope of the fluoride ion-selective electrode was measured and calculated in the concentration range in which the potential of samples occurred. Concentrations of fluorides in tea in the range from 24.5 mg/kg to 254.5 mg/kg were found. In order to check the accuracy of the method certified reference materials were used. The precision expressed as the relative standard deviation ranged from 3.7% to 15.9%. The method is fast, accurate and reliable for this kind of analysis.
منابع مشابه
Determination of halogens in coal after digestion using the microwave-induced combustion technique.
The microwave-induced combustion (MIC) technique was applied for coal digestion and further determination of bromide, chloride, fluoride, and iodide by ion chromatography (IC). Samples (up to 500 mg) were combusted at 2 MPa of oxygen. Combustion was complete in less than 50 s, and analytes were absorbed in water or (NH(4))(2)CO(3) solution. A reflux step was applied to improve analyte absorptio...
متن کاملMicrowave induced combustion Synthesis of Nano- Codoped Ceria and their electrical properties
In this work, Ce0.75Gd0.1Ca0.15O1.8 nanopowders are successfully synthesized by a Glycine-nitrate combustionprocess under the microwave irradiation. Then calcination was carried out at 700 °C. Calcined powdersidentified by room temperature X-ray diffraction were single phase and had a crystallite size between 16 to 24nm (based on Schererr formula). Scanning electron microscopy (SEM) was employe...
متن کاملDigestion of biological materials using the microwave-assisted sample combustion technique
In this study a procedure for sample digestion based on sample combustion assisted by microwave radiation is proposed. Combustion is started by microwave radiation in the presence of oxygen under pressure using ammonium nitrate as aid for ignition. The system was adapted in a microwave oven with quartz closed vessels. A quartz piece is used simultaneously as a sample holder and as protection to...
متن کاملOne Step Rapid Synthesis of Nano-Crystalline ZnO by Microwave-Assisted Solution Combustion Method
In this study nano-crystalline ZnO particles were synthesized by microwave-assisted solution combustion method. Zinc nitrate and urea were used as oxidizer and fuel, respectively. The effect of fuel to oxidizer (F/O) ratio on ZnO powder properties was investigated by using different urea/nitrate ratios. X-ray diffractometer, scanning electron microscopy and fourier transform infra-red were used...
متن کاملSurface Modification of Silicone Rubber Membrane by Microwave Discharge to Improve Biocompatibility
Wetability of biocompatible polymers can be improved by plasma surface modification. The purpose of this study was to surface modify an experimental poly (dimethylsiloxane) rubber (PDMS) material in order to improve its wetability and biocompatibility. Surface properties of the PDMS were characterized using contact angles measurement for wetability analysis. Samples of experimental silico...
متن کامل