Effects of preheating and cooling durations on roll-to-roll hot embossing—erratum.
نویسندگان
چکیده
In Microscopy and Microanalysis, an article, MAM1401332, Kim et al., was posted on First View, but shortly after, a co-author spotted an error at Figure 3c whereby a white rule appeared where it did not belong.
منابع مشابه
Effects of Preheat Supply on Embossed Pattern Depth in Roll-to-Roll Process
In this study, we examined the sensitivity of embossed pattern depth to preheat supply and cooling, and also tested how pattern type and density affect the embossed depth. The main factors such as roller temperature, roller speed, and applied force that mostly affect embossed pattern qualities of roll-to-roll hot embossing were determined based on the response surface methodology. Eight conditi...
متن کاملA Low-aspect-ratio, Roll-to-roll Hot Embossed Inertial Microfluidic Sorter
This work presents a low-aspect-ratio (LAR) inertial microfluidic design compatible with roll-to-roll (R2R) hot embossing for size-based cell or microparticle separation in a low-cost and disposable format. The device consists of two segments of LAR channels in which inertial lift forces are used to differentiate lateral positions based on size for separation downstream. Separation of 18μm and ...
متن کاملInvestigation of Friction Coefficient Effects on Fishtail Defect in Hot Ring Rolling Process
Hot ring rolling is a highly nonlinear, unsteady-state and asymmetry process which is affected by many parameters. The friction coefficient between the ring ,the driver roll and the idle roll is one of the problems, which has significant effect on the quality of final product. In this study, the effect of these two parameters on hot ring rolling was investigated based on a 3D coupled-thermo mec...
متن کاملPrediction of Work Roll Initial Crown according to Desired Strip Profile in Hot Rolling
The final hot strip profile is a superposition of the roll initial crown, the roll bending and flattening crown, the roll wearing crown and the roll thermal crown. In this research, linear regression models are proposed to predict the roll force, the roll wearing crown and the roll thermal crown using experimental data provided by Mobarake Steel Complex (MSC). The short beam theory based on ela...
متن کاملRoll-to-roll large-format slot die coating of photosensitive resin for UV embossing
Roll-to-roll large-format coating and UV embossing processes aim to revolutionise the manufacturing of functional films, with the ability to process a largearea at one time, resulting in high throughput and cost reduction. In this article, we present the experimental results obtained during the process development for roll-toroll large-format coating and UV embossing. We have investigated key a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada
دوره 21 1 شماره
صفحات -
تاریخ انتشار 2015