New Composites LnBDC@AC and CB[6]@AC: From Design toward Selective Adsorption of Methylene Blue or Methyl Orange
نویسندگان
چکیده
New porous composites LnBDC@AC (AC = Activated carbon, Ln = Eu and Gd and BDC = 1,4-benzenedicaboxylate) and CB[6]@AC (CB[6] = Cucurbit[6]uril) were obtained using hydrothermal route. The LnBDC and CB[B] are located inside the pore of the carbon materials as was observed in SEM-EDS, XRPD and FT-IR analysis. Porosimetry analysis showed values typically between AC and LnBDC material, with pore size and surface area, respectively, 29,56 Å and 353.98 m2g-1 for LnBDC@AC and 35,53 Å and 353.98 m2g-1 for CB[6]@AC. Both materials showed good absorptive capacity of metil orange (MO) and methylene blue (MB) with selectivity as a function of pH. For acid pH, both materials present selectivity by MB and alkaline pH for MO, with notable performance for CB[6]@AC. Additionally, europium luminescence was used as structural probe to investigate the coordination environment of Eu3+ ions in the EuBDC@AC composite after adsorption experiment.
منابع مشابه
Synthesis of activated carbon/zinc oxide nanocomposite from rapeseed plant waste by green chemistry method, evaluation of its performance in Methylene Blue pigment removal and optimization of influencing parameters using design expert
Background and Objective: Due to the water shortages and the presence of industrial pollutants in water resources, wastewater treatment, especially colored wastewater, is essential. The aim of this study was to treat wastewater containing Methylene Blue dye using activated carbon nanocomposite/zinc oxide nanoparticles (ZnO/AC) obtained from canola oil waste by green method. Materials and Metho...
متن کاملIsotherm and Kinetic Study of Disulfin Blue and Methyl Orange dyes by adsorption onto by Titanium dioxide- NPs loaded onto Activated Carbon : Experimental Design
The applicability of TiO 2 nanoparticles (TiO 2 -NPs-AC) for removing Disulfine Blue (DSB) and Methyl Orange (MO) from aqueous solutions has been reported.The influence of nanoparticle loaded on activated carbon (TiO 2 -NPs-AC) dosage, pH of the sample solution, individual dye concentration, contact time between the sample and the adsorbent were studied by central composite design(CCD) under re...
متن کاملSynthesis and Characterization of Modified BiOCl and Their Application in Adsorption of Low-Concentration Dyes from Aqueous Solution
The synthesis and characterization of BiOCl and Fe3+-grafted BiOCl (Fe/BiOCl) is reported that are developed as efficient adsorbents for the removal of cationic dyes rhodamine B (RhB) and methylene blue (MB) as well as anionic dyes methyl orange (MO) and acid orange (AO) from aqueous solutions with low concentration of 0.01~0.04 mmol/L. Characterizations by various techniques indicate that Fe3+...
متن کاملThe Perlite-calcium Alginate-activated Carbon Composite as an Efficient Adsorbent for the Removal of Dyes from Aqueous Solutions
To remove dyes from wastewater, the perlite-calcium alginate–activated carbon (PCA) composite was prepared by a simple method. This composite was characterized by FTIR, XRD, SEM, and BET techniques. A high capacity of PCA was observed for the adsorption of some dyes such as methylene blue (MB) and methyl orange (MO) from aqueous solutions (1111 and 909 mg g-1). The best results were achieved at...
متن کاملPreparation and Characterization of Activated Carbon from Lapsi (Choerospondias axillaris) Seed Stone by Chemical Activation with Potassium Hydroxide
Activated carbon (AC) was prepared from Lapsi seed stone by chemical activation with Potassium hydroxide at 400°C. The AC was characterized by pH, moisture content, Fourier transform-infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), methylene blue (MB) and iodine (I2) number. FT-IR spectra indicated the presence of various oxygen containing functional groups on the surface of AC...
متن کامل