A framework for numerical integration of crystal elasto-plastic constitutive equations compatible with explicit finite element codes
نویسندگان
چکیده
In this paper we summarize the elements of a numerical integration scheme for elasto-plastic response of single crystals. This is intended to be compatible with large-scale explicit finite element codes and therefore can be used for problems involving multiple crystals and also overall behavior of polycrystalline materials. The steps described here are general for anisotropic elastic and plastic response of crystals. The crystallographic axes of the lattice are explicitly stored and updated at each time step. A plastic predictor–elastic corrector scheme is used to calculate the plastic strain rates on all active slip systems based on a rate-dependent physics-based constitutive model without the need of further auxiliary assumptions. Finally we present the results of numerous calculations using a physics-based rateand temperature-dependent model of copper and the effect of elastic unloading, elastic crystal anisotropy, and deformation-induced lattice rotation are emphasized. 2007 Elsevier Ltd. All rights reserved.
منابع مشابه
Elasto-plastic analysis of discontinuous medium using linearly conforming radial point interpolation method
In this paper, the linearly conforming enriched radial basis point interpolation method is implemented for the elasto-plastic analysis of discontinuous medium. The linear conformability of the method is satisfied by the application of stabilized nodal integration and the enrichment of radial basis functions is achieved by the addition of linear polynomial terms. To implement the method for the ...
متن کاملNumerical algorithm for solving the elasto-plastic problem with isotropic hardening and the plane stress state
In this paper a numerical approach of the elasto-plastic problem with mixed hardening in the plane stress state, within the classical constitutive framework of small deformation, is proposed. In the formalized problem, the non-zero normal component of the strain (namely, the component in the direction perpendicular to the plane of stress) is considered to be compatible with the plane stress. We...
متن کاملEfficiency of Anti-Hourglassing Approaches in Finite Element Method (TECHNICAL NOTE)
one of the simplest numerical integration method which provides a large saving in computational efforts, is the well known one-point Gauss quadrature which is widely used for 4 nodes quadrilateral elements. On the other hand, the biggest disadvantage to one-point integration is the need to control the zero energy modes, called hourglassing modes, which arise. The efficiency of four different an...
متن کاملA New Integration Algorithm for the Finite Element Analysis of Elasto-plastic Problems
The Finite Element analysis of the elastic-plastic behavior is of fundamental importance in automobile industry. To predict accurately the final geometry of the structure and the distribution of strain and stress, accurate integration of the constitutive laws over the strain path is essential. Our objective in this paper is to develop an effective and accurate stress integration scheme for the ...
متن کاملA 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies
The development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. In Petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. Studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. In this study, which is a...
متن کامل