Application Note 299 Audio Applications of Linear Integrated Circuits
ثبت نشده
چکیده
Although operational amplifiers and other linear ICs have been applied as audio amplifiers, relatively little documentation has appeared for other audio applications. In fact, a wide variety of studio and industrial audio areas can be served by existing linear devices. The stringent demands of audio requirements often mean that unusual circuit configurations must be used to satisfy a requirement. By combining off-the-shelf linear devices with thoughtful circuit designs, low cost, high performance solutions are achievable. An example appears in Figure 1.
منابع مشابه
Application Note 263 Sine Wave Generation Techniques
Producing and manipulating the sine wave function is a common problem encountered by circuit designers. Sine wave circuits pose a significant design challenge because they represent a constantly controlled linear oscillator. Sine wave circuitry is required in a number of diverse areas, including audio testing, calibration equipment, transducer drives, power conditioning and automatic test equip...
متن کاملModeling of Substrate Noise Impact on a Single-Ended Cascode LNA in a Lightly Doped Substrate (RESEARCH NOTE)
Substrate noise generated by digital circuits on mixed-signal ICs can disturb the sensitiveanalog/RF circuits, such as Low Noise Amplifier (LNA), sharing the same substrate. This paperinvestigates the adverse impact of the substrate noise on a high frequency cascode LNA laid out on alightly doped substrate. By studying the major noise coupling mechanisms, a new and efficientmodeling method is p...
متن کاملTemperature Measurement Circuits for Embedded Applications
This application note shows how to select a temperature sensor and conditioning circuit to maximize the measurement accuracy and simplify the interface to the microcontroller. Practical circuits and interface techniques will be provided for embedded applications with thermocouples, Resistive Temperature Detectors (RTDs), thermistors and silicon integrated circuit temperature sensors. The attrib...
متن کاملOp Amp Precision Design: Random Noise
AN1228 INTRODUCTION This application note covers the essential background information and design theory needed to design low noise, precision op amp circuits. The focus is on simple, results oriented methods and approximations useful for circuits with a low-pass response. The material will be of interest to engineers who design op amps circuits which need better signal-to-noise ratio (SNR), and...
متن کامل