A start-up method for a speed sensorless stator-flux-oriented vector-controlled induction motor drive
نویسندگان
چکیده
This letter describes a zero-speed start-up method of a speed sensorless stator-flux-oriented direct vector-controlled induction motor drive with the help of a machine current model that does not use any speed signal. The machine starts smoothly with vector control at finite developed torque and then transitions to the standard direct vector-control mode with the voltage model signals as the speed begins to develop. The direct vector-control mode with voltage model uses programmable cascaded low-pass filters for flux-vector synthesis [2] and enables the drive to operate from zero speed to field-weakening mode. As the drive speed falls to zero, the drive again transitions to start-up mode, so that it can be smoothly started again. The performance of the start-up scheme has been verified on a 100-kW electric vehicle drive.
منابع مشابه
A Novel MRAS Based Estimator for Speed-Sensorless Induction Motor Drive
In this paper, a novel stator current based Model Reference Adaptive System (MRAS) estimator for speed estimation in the speed-sensorless vector controlled induction motor drives is presented. In the proposed MRAS estimator, measured stator current of the induction motor is considered as a reference model. The estimated stator current is produced in an adjustable model to compare with the measu...
متن کاملA Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer
This paper presents a new adaptive Sliding-Mode flux observer for speed sensorless and rotor flux control of three-phase induction motor (IM) drives. The motor drive is supplied by a three-level space vector modulation (SVM) inverter. Considering the three-phase IM Equations in a stator stationary two axis reference frame, using the partial feedback linearization control and Sliding-Mode (SM) c...
متن کاملSensorless Vector Control of Linear Induction Motor on Primary and Secondary Flux Oriented based on Fuzzy PI Controller
This paper presents a sensorless system drive on primary flux oriented control (PFOC) and secondary flux oriented control (SFOC) for the linear induction motor (LIM) with taking into account end effect. Extended kalman filter (EKF) is applied to estimate LIM speed by measuring motor voltages and currents. In order to achieve desirable dynamic and robustness motor performance instead of traditio...
متن کاملRotor Flux Oriented Sensorless Induction Motor Drive for Low Power Applications
This paper presents a new rotor flux oriented linearizing control with speed estimation scheme for adjustable speed induction motor (IM) drive. In this scheme, rotor flux oriented vector control is used to linearize the IM drive, and decouple torque and flux. Also, a stator flux based flux estimator is used to estimate the synchronous speed. The motor speed is estimated by measuring only two li...
متن کاملSpeed-sensorless sliding-mode torque control of an induction motor
Novel induction motor control optimizing both torque response and efficiency is proposed in the paper. The main contribution of the paper is a new structure of rotor flux observer aimed for the speed-sensorless operation of induction machine servo-drive at both, low and high speed, where rapid speed changes can occur. The control differs from the conventional field-oriented control. Stator and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEEE Trans. Industrial Electronics
دوره 44 شماره
صفحات -
تاریخ انتشار 1997