Laser Micromachining of Glass, Silicon and Ceramics. a Review
نویسندگان
چکیده
A brief review is focused on laser micromachining of materials. Micromachining of materials is highly widespread method used in many industries, including semiconductors, electronic, medical, automotive, communication and aerospace. This method is a promising tool for material processing with micron and submicron resolution. In this paper micromachining of glass, silicon and ceramics is considered. Interaction of these materials with laser radiation and recent research held on laser material treatment is provided.
منابع مشابه
Fabrication of microstructures in photoetchable glass ceramics using excimer and femtosecond lasers
Joohan Kim Halil Berberoglu Xianfan Xu Purdue University School of Mechanical Engineering West Lafayette, Indiana 47907 E-mail: [email protected] Abstract. We discuss laser fabrication of microstructures in photoetchable glass ceramics called Foturan (Schott Company, Elmsford, NY). A KrF excimer laser (l5248 nm, t525 ns) is used for surface micromachining, and a femtosecond laser (l5800 nm, t5...
متن کاملFemtosecond micro- and nano-machining of materials for microfluidic applications
Ultrafast laser micromachining is a promising candidate for microand nano-fabrication technology. Due to the high precision of femtosecond ablation, laser-machined features can be added to devices prototyped by lithography. To accomplish that, parametric studies of laser interrogation of materials of interest are necessary. We present femtosecond laser ablation studies of glass, PDMS, fused sil...
متن کاملAn Experimental Investigation on Surface Roughness and Edge Chipping in Micro Ultrasonic Machining
Surface quality including surface roughness and edge chipping is a key process measure in micro ultrasonic machining (Micro-USM) as an efficient process for micromachining of hard and brittle materials. Process parameters such as ultrasonic vibration amplitude, static load, type of tool material, type and size of abrasive particles and slurry concentration can influence the surface quality. How...
متن کاملTowards fast femtosecond laser micromachining of fused silica: The effect of deposited energy.
Femtosecond laser micromachining of glass material using low-energy, sub-ablation threshold pulses find numerous applications in the fields of integrated optics, lab-on-a-chips and microsystems in general. In this paper, we study the influence of the laser-deposited energy on the performance of the micromachining process. In particular, we show that the energy deposited in the substrate affects...
متن کاملAn Experimental Investigation on Surface Roughness and Edge Chipping in Micro Ultrasonic Machining
Surface quality including surface roughness and edge chipping is a key process measure in micro ultrasonic machining (Micro-USM) as an efficient process for micromachining of hard and brittle materials. Process parameters such as ultrasonic vibration amplitude, static load, type of tool material, type and size of abrasive particles and slurry concentration can influence the surface quality. How...
متن کامل