Fiber optic immunochemical sensor for continuous, reversible measurement of phenytoin.
نویسندگان
چکیده
This fiber optic sensor, based on a homogeneous fluorescence energy-transfer immunoassay, operates in a continuous, reversible manner to quantify the anticonvulsant drug phenytoin. B-Phycoerythrin-phenytoin and Texas Red-labeled antibody to phenytoin were sealed inside a short length of cellulose dialysis tubing, which was cemented to the distal end of an optical fiber. When the sensor was alternately placed into solutions with various concentrations of free phenytoin, the drug crossed the dialysis membrane and displaced a fraction of the B-phycoerythrin-phenytoin from the antibody. The resulting change in fluorescence signal was measured with a fiber optic fluorometer. A typical competitive-binding calibration curve was seen between 5 and 500 mumol of phenytoin per liter. Equilibrium response time ranged from 5 to 30 min for different sensors. Replicate equilibrium measurements with one sensor, alternated eight times between two solutions of phenytoin, gave a CV of 2.1% (n = 16) at 0 mumol/L and 2.4% (n = 13) at 100 mumol/L. A reversible immunochemical sensor can be made that has a response time suitable for continuous concentration measurements.
منابع مشابه
A fiber optic sensor for measuring glucose in aqueous solutions
In this paper, the set-up of a multi-mode fiber optic sensor for measuring glucose in aqueous solutions is investigated and evaluated. The basis of this sensor is based on the Fresnel Reflection. In this setup, a helium-neon laser is used as a light source, a fiber optic probe, photocell as detector and a digital multimeter. The statistical analysis of the recorded data shows a highly linear be...
متن کاملFiber - Optic Sensing of Linear Thermal Expansion (RESEARCH NOTES)
The use of a LED fiber-optic sensor to measure displacement and linear thermal expansion is described. It has a sensitivity of about 0.6 mV/mm, a resolution of 1.25 mm, and a dynamic rang of 400 mm for displacement measurements. For thermal expansion, it shows a sensitivity of about 3.5 mV/C, and the experimental linear expansion values are in agreement with those calculated. The reported senso...
متن کاملSensitivity Enhancement of Fiber Optic Diesel Adulteration Detection Sensor Using Stripped Clad SBend Section
A novel geometry for enhancing the sensitivity of intensity modulated refractometric fiber optic sensor for detection of adulteration level in diesel by kerosene is proposed. In this multimode plastic optical fiber is uncladded for specific length and bent into S shape. This geometry is simulated and analyzed using Beam Propagation Method in Beam prop RSOFT software. When sensor is immersed in ...
متن کاملMonitoring of Railway Deformations using Distributed Fiber Optic Sensors
Natural phenomena like earthquakes, landslides, avalanches or mud flows can cause severe damages of railway tracks. Today’s monitoring concepts either focus on a permanent monitoring of known problematic sites or an epochwise measurement of the railway track with special measurement cars. In this paper we present a new approach for continuous monitoring of railway tracks over long distances. Th...
متن کاملFrequency-Shifted Interferometry — A Versatile Fiber-Optic Sensing Technique
Fiber-optic sensing is a field that is developing at a fast pace. Novel fiber-optic sensor designs and sensing principles constantly open doors for new opportunities. In this paper, we review a fiber-optic sensing technique developed in our research group called frequency-shifted interferometry (FSI). This technique uses a continuous-wave light source, an optical frequency shifter, and a slow d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Clinical chemistry
دوره 34 7 شماره
صفحات -
تاریخ انتشار 1988