Velocity dependence of friction of confined hydrocarbons.
نویسندگان
چکیده
We present molecular dynamics friction calculations for confined hydrocarbon "polymer" solids with molecular lengths from 20 to 1400 carbon atoms. Two cases are considered: (a) polymer sliding against a hard substrate and (b) polymer sliding on polymer. We discuss the velocity dependence of the frictional shear stress for both cases. In our simulations, the polymer films are very thin (approximately 3 nm), and the solid walls are connected to a thermostat at a short distance from the polymer slab. Under these circumstances we find that frictional heating effects are not important, and the effective temperature in the polymer film is always close to the thermostat temperature. In the first setup (a), for hydrocarbons with molecular lengths from 60 to 1400 carbon atoms, the shear stresses are nearly independent of molecular length, but for the shortest hydrocarbon C(20)H(42) the frictional shear stress is lower. In all cases the frictional shear stress increases monotonically with the sliding velocity. For polymer sliding on polymer (case b) the friction is much larger, and the velocity dependence is more complex. For hydrocarbons with molecular lengths from 60 to 140 C atoms, the number of monolayers of lubricant increases (abruptly) with increasing sliding velocity (from 6 to 7 layers), leading to a decrease of the friction. Before and after the layering transition, the frictional shear stresses are nearly proportional to the logarithm of sliding velocity. For the longest hydrocarbon (1400 C atoms) the friction shows no dependence on the sliding velocity, and for the shortest hydrocarbon (20 C atoms) the frictional shear stress increases nearly linearly with the sliding velocity.
منابع مشابه
Effective viscosity of confined hydrocarbons.
We present molecular dynamics friction calculations for confined hydrocarbon films with molecular lengths from 20 to 1400 carbon atoms. We find that the logarithm of the effective viscosity η(eff) for nanometer-thin films depends linearly on the logarithm of the shear rate: log η(eff)=C-nlog ̇γ, where n varies from 1 (solidlike friction) at very low temperatures to 0 (Newtonian liquid) at very h...
متن کاملCockroaches traverse crevices, crawl rapidly in confined spaces, and inspire a soft, legged robot.
Jointed exoskeletons permit rapid appendage-driven locomotion but retain the soft-bodied, shape-changing ability to explore confined environments. We challenged cockroaches with horizontal crevices smaller than a quarter of their standing body height. Cockroaches rapidly traversed crevices in 300-800 ms by compressing their body 40-60%. High-speed videography revealed crevice negotiation to be ...
متن کاملPlastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation
In the present investigation, two dimensional elastoplastic finite element analysis was conducted to assess the deformation characteristics of Al 1100 alloy during continuous confined strip shearing (C2S2) process. The results of simulations showed that the plastic strain distribution across the deformed sample is non-uniform irrespective of the amount of friction and C2S2 die angle. The most u...
متن کاملDependence of kinetic friction on velocity: master equation approach.
We investigate the velocity dependence of kinetic friction with a model that makes minimal assumptions on the actual mechanism of friction so that it can be applied at many scales, provided the system involves multicontact friction. Using a recently developed master equation approach, we investigate the influence of two concurrent processes. First, at a nonzero temperature, thermal fluctuations...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Langmuir : the ACS journal of surfaces and colloids
دوره 26 11 شماره
صفحات -
تاریخ انتشار 2010