Influence of Laser Ablation on Stainless Steel Corrosion Behaviour
نویسندگان
چکیده
Laser ablation is the method for material removing from a surface using pulsed lasers. It is used for surface structuring, laser drilling or laser marking. A change of the corrosion behavior of a base material caused by thermal effects during laser processing is an important problem of this technology. Possibilities of surface modification of stainless steel using laser ablation are presented in this contribution. The most important processes that take place during laser treatment of material surface are described. The influence of laser processing parameters on resulting material surface state and a possible connection of laser parameters with corrosion tests results are discussed.
منابع مشابه
Influence of laser marking on stainless steel surface and corrosion resistance
Laser marking is the modern industrial application for non-contact surface modification. An incidence of a laser beam on the marked surface causes material and structural changes, which lead to optical changes of the surface. The processes during the laser-surface interaction can also affect other surface properties, especially corrosion properties in the case of stainless steel. Laser marking ...
متن کاملElectrochemical and Tribological Behaviour of Oxide Dispersion Strengthened Duplex Stainless Steel in Mine Water Environment
Abstract This work investigated the electrochemical and aqueous tribological behavior of hot pressed 2205 duplex stainless steel (DSS). DSS sintered composites of different volume percent (% vol) of partially stabilized zirconia (PSZ) was developed using powder metallurgy (PM) technique. Electrochemical behaviour was studied at room temperature, using open circuit potential and potentiody...
متن کاملCorrosion Behaviour of Nickel Coated AISI 316 Stainless Steel as a Function of Annealing Temperature
AISI 316 stainless steels were coated with 250 nm Ni film by electron beam deposition and post-annealed at different temperatures with a nitrogen flow of 600 cm3min-1 nitrogen. The prepared samples were corrosion tested in 1.0 M sulphuric acid solution using potentiodynamic technique. Crystallographic and morphological structure of the samples were analyzedanalysed by X-ray diffraction (XRD) an...
متن کاملApplications of soft X-ray absorption spectroscopy to the study of passive and oxide layers on stainless steels: influence of ion implantation
Soft X-ray absorption spectroscopy (XAS) has been used to study the influence of Si ion implantation on the passive layer of AISI 304 stainless steel, as well as on its high-temperature oxidation behaviour. Ion implantation is a usual technique to improve the corrosion and oxidation resistance of steels. To study the effects of ion implantation on the room temperature corrosion behavior of AISI...
متن کاملThe Corrosion Resistance of Composite Arch Wire Laser-Welded By NiTi Shape Memory Alloy and Stainless Steel Wires with Cu Interlayer in Artificial Saliva with Protein
In this paper, the corrosion resistance of laser-welded composite arch wire (CoAW) with Cu interlayer between NiTi shape memory alloy and stainless steel wire in artificial saliva with different concentrations of protein was studied. It was found that protein addition had a significant influence on the corrosion behavior of CoAW. Low concentration of protein caused the corrosion resistance of C...
متن کامل