Biogrout: A Novel Binding Material for Soil Improvement and Concrete Repair
نویسندگان
چکیده
Grout is a binding agent or binder often used with building materials to improve their durability functions. It may be organic or inorganic material used for sealing or consolidation of cracks, pores, or voids in order to improve the mechanical properties and impermeability of a particular system, whether soil, cementitious or of other building materials. Grouts act as dispersion agents where dispersed particles form a network responsible for the effectiveness of grouting properties. Chemical grouts are the most common and well-known grouting materials used for sealing sand, soil, or other matrices. However, this is an expensive technique and it also affects the environment because chemical grouts based on acrylamides, lignosulfonates, and polyurethane are toxic and environmentally harmful. Thus, it is necessary to find new grouting materials and methods of injection. It is important to choose grouting materials that are soft and fine enough to penetrate into the discontinuities in voids, cracks, or cavities to fill them (Bras et al., 2013).
منابع مشابه
Development of an Eco-Friendly, Cost-Effective Biogrout for Concrete Crack Repair Final Report
متن کامل
Study of effect of paste volume, water to cementitious materials and fiber dosages on rheological properties and in-situ strength of self-compacting concrete
As a vibration- free concrete, self- compacting concrete (SCC) can be easily used in the absence of consolidation, therefore; it is a good option for repairing and retrofitting concrete structures. The quality of repair layer is highly effective on a successful repair. Accordingly, in this study, factors affecting the quality of fiber-reinforced self-compacting concrete repair layer, including ...
متن کاملDevelopment of an Eco-Friendly, Cost-Effective Biogrout for Concrete Crack Repair tech transfer summary
Cement-based materials have often been used for infrastructure construction and repair. The production of conventional Portland cement is energy-consuming and environmentally unfriendly. For example, production of one ton of Portland cement generates approximately one ton of carbon dioxide (CO 2 ) from calcining limestone and fuel use. It is estimated that cement production contributes 7% of to...
متن کاملExperimental Investigation of the Methods of Evaluating the Bond Strength Between Concrete Substrate and Repair Materials
This investigation was aimed at studying the effect of test methods on bond strength between concrete substrate and repair material. Four test methods with cementations or modified-cementations repair materials, and two surface roughnesses were studied. The methods used were pull-off, slant shear, splitting prism and a new direct shear named Bi-Surface shear test. While the coefficient of varia...
متن کاملEffect of Seawater on Micro-Nano Air Bubbles Concrete for Repair of Coastal Structures
This paper investigated the effects of seawater curing of concrete made by Micro-Nano Air Bubbles (MNAB) on compressive, flexural and tensile strengths of the concrete. This product will be applicable for rehabilitation or repair of coastal RC structures. In this research, the effect of different combinations of concrete ingredients including 0-100, 25-75, 50-50, 75-25, and 100-0 percent ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Frontiers in microbiology
دوره 7 شماره
صفحات -
تاریخ انتشار 2016