Characterization of reinforced concrete beams strengthened by steel reinforced polymer and grout ( SRP and SRG ) composites
نویسنده
چکیده
13 The use of externally bonded steel reinforced polymer (SRP) and steel reinforced grout (SRG) is a promising new technology for increasing fl a d b a 14 15 16 17 18 19 © 20
منابع مشابه
Flexural Capacity of Rc Beams Strengthened with Srp and Srg
The use of externally bonded Steel-Reinforced Polymer (SRP) and Steel Reinforced Grout (SRG) composites is a promising new technology for increasing the flexural and shear capacities of reinforced concrete (RC) members. The reinforcement system in these composites is a sheet made up of unidirectional cords consisting of tightly wound ultra high strength steel wires. The reinforcement can be mol...
متن کامل3D FE Analysis of RC Beams Externally Strengthened with SRG/SRP Systems
The purpose of this study is to evaluate, through a nonlinear Finite Element (FE) analysis, the structural behavior of Reinforced Concrete (RC) beams externally strengthened by using Steel Reinforced Grout (SRG) and Steel Reinforced Polymer (SRP) systems. The parameters taken into account were the external strengthening configuration, with or without U-wrap end anchorages, as well as the streng...
متن کاملFull Scale Reinforced Concrete Beam-Column Joints Strengthened with Steel Reinforced Polymer Systems
This paper presents the results of an experimental campaign performed at the Laboratory of Materials and Structural Testing of the University of Salerno (Italy) in order to investigate the seismic performance of reinforced concrete (RC) beam-column joints strengthened with steel reinforced polymer (SRP) systems. With the aim to represent typical façade frames’ beam-column subassemblies found in...
متن کاملRetrofitting of Reinforced Concrete Beams with Steel Fiber Reinforced Composite Jackets
In the present study, a new method for retrofitting reinforced concrete beam is introduced in which steel-concrete composite jackets containing steel fiber is used. For this purpose, 75% of the peripheral surface of reinforced concrete beams was initially reinforced using steel plates and bolts, and steel fiber reinforced concrete was used between the steel plates and the peripheral surfaces of...
متن کاملBehavior of Coupling Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets
In this research, using the results of 6 tests, the effect of Carbon Fiber Reinforced Polymer (CFRP) sheets on the behavior of reinforced concrete coupling beams of shear walls is studied. First, in the experimental part of the study, four coupling beams with different reinforcements were manufactured and tested. Then, after the failure of the specimens, two of them were rehabilitated and stren...
متن کامل