3D Packaging Architectures and Assembly Process Design
نویسندگان
چکیده
2D Two dimensional 3D Three dimensional BEOL Back end of line BI Burn-In CMP Chemical mechanical polishing D2D Die-to-die D2W Die-to-wafer ECD Electro-chemical deposition ECG Deleted in chapter EMIB Embedded multi-die interconnect bridge FEOL Front end of line IP Intellectual property KGD Known good die KOZ Keep out zone MCM Multi chip module MCP Multi chip package MEOL Middle end of line MPM Multi package module PECVD Plasma enhanced chemical vapor deposition PVD Plasma vapor deposition Rx Receiver SBS Side by side
منابع مشابه
TSV MEOL (Mid-End-Of-Line) and its Assembly/Packaging Technology for 3D/2.5D Solutions
Increasing demand for new and more advanced electronic products with a smaller form factor, superior functionality and performance with a lower overall cost has driven semiconductor industry to develop more innovative and emerging advanced packaging technologies. One of the hottest topics in the semiconductor industry today is a 3D packaging using Through Silicon Via (TSV) technology. Driven by...
متن کاملSolderable Anisotropic Conductive Adhesives for 3d Package Applications
3D packaging has recently become very attractive because it can provide more flexibility in device design and supply chain, reduce the gap between silicon die and organic substrate, help miniaturize devices and meet the demand of high speed, provide more memory, more function and low cost. With the advancement of 3D packaging, the bump height is now down from 80μ to 10μ. When the bump diameter ...
متن کاملEffect of Wafer Level Underfill on the Microbump Reliability of Ultrathin-Chip Stacking Type 3D-IC Assembly during Thermal Cycling Tests
The microbump (μ-bump) reliability of 3D integrated circuit (3D-IC) packaging must be enhanced, in consideration of the multi-chip assembly, during temperature cycling tests (TCT). This research proposes vehicle fabrications, experimental implements, and a nonlinear finite element analysis to systematically investigate the assembled packaging architecture that stacks four thin chips through the...
متن کاملSelf-Packaging and Self-Mounting of Miniaturized Semiconductor Dies Across Length Scales and 3D Topologies
This proceeding reviews recent progress in fluidic surface-tension-directed self-assembly involving liquid solder which has been applied to the self-packaging and self-mounting of discrete inorganic semiconductor device components at different length scales producing electrically interconnected devices and systems. Results included flip chip self-assembly with unique angular orientation and con...
متن کاملEncapsulation Technology for 3 D Stacked Packages
The continuing demand for yet smaller and lighter electronic devices requires micro packaging where shrinkage in the geometry of the substrates as well as decrease of the area of the die is needed. Higher device and circuitry integration of the silicon die, finer pitch of fully populated arrays interconnections are examples of how the industry is meeting these miniaturizations demand. Today tec...
متن کامل