The Assessment and Analysis of using a Temperature Sensor to Regulate the Automatic Gain Control of the Amplifier in a FLASH - OFDM System
نویسنده
چکیده
This study emphasizes the simulation and analysis of the compensatory effect of temperature on automatic gain control (AGC). From the analytical results, a temperature regulation mechanism was proposed. The technology most appropriate for and adaptive to mobile terminal stations under various temperatures was considered to ensure excellent transfer quality of the mobile terminal station. Finally, the effectiveness of the proposed temperature-regulating AGC mechanism in regulating the output power and gain of low noise amplifiers (LNAs) was verified. This mitigated the effects of interference and improved the service quality during the transfer process. The temperature sensor for regulating AGC was then applied to mobile wireless transfer devices and integrated into fast low-latency access with seamless handoff-orthogonal frequency division multiplexing (FLASH-OFDM) wireless mobile network cards to assess and verify the expected effects. In the future, this mechanism can provide a reference for mobile device technologies such as worldwide interoperability for microwave access (WIMAX) and long-term evolution (LTE).
منابع مشابه
Improving Linearity of CMOS Variable-gain Amplifier Using Third-order Intermodulation Cancellation Mechanism and Intermodulation Distortion Sinking Techniques
This paper presents an improved linearity variable-gain amplifier (VGA) in 0.18-µm CMOS technology. The linearity improvement is resulted from employing a new combinational technique, which utilizes third-order-intermodulation (IM3) cancellation mechanism using second-order-intermodulation (IM2) injection, and intermodulation distortion (IMD) sinking techniques. The proposed VGA gain cell co...
متن کاملA New Ultra-Wideband Low Noise Amplifier With Continuous Gain Control
This paper presents a new variable gain low noise amplifier (VG-LNA) for ultra-wideband (UWB) applications. The proposed VG-LNA uses a common-source (CS) with a shunt-shunt active feedback as an input stage to realize input matching and partial noise cancelling. An output stage consists of a gain-boosted CS cascode and a gain control circuit that moves the high resonant frequency to higher freq...
متن کاملApplication of Piezoelectric and Functionally Graded Materials in Designing Electrostatically Actuated Micro Switches
In this research, a functionally graded microbeam bonded with piezoelectric layers is analyzed under electric force. Static and dynamic instability due to the electric actuation is studied because of its importance in micro electro mechanical systems, especially in micro switches. In order to prevent pull-in instability, two piezoelectric layers are used as sensor and actuator. A current amplif...
متن کاملUltra-Widband Distributed Amplifier Using Loss Compensation Technique on Both Input and Output Circuit
In this paper, we analyze a distributed amplifier based on input/output attenuation compensation. The analysis is carried out for a HEMT transistor; and a constant-k section filter is used to calculate the amplifier’s characteristics such as attenuation factor, phase constant and gain. The proposed design approach enables us to examine the tradeoff among the variables, which include the type an...
متن کاملAnalysis and Comparison of PAPR Reduction Techniques in OFDM Systems
The destructive impact of fading environments and also bandwidth limitations are two main challenges which communication is dealing with them. These challenges can affect on the growth of wireless communication and even cause reliable communications and high data rate to be prevented. Thus, OFDM (Orthogonal Frequency Division Multiplexing) modulation by using of fast calculation hardwares such ...
متن کامل