Metallic microgripper with SU-8 adaptor as end-effectors for heterogeneous micro/nano assembly applications
نویسنده
چکیده
This paper presents design, fabrication, and characterization of easy-to-handle electroplated nickel microgrippers with SU-8 adaptors for heterogeneous micro/nano assembly applications. Two distinctive designs of microgrippers as end-effectors of micro/nano assembly applications have been developed in this work. The first design is 200 lm thick electroplated nickel microgripper with a plastic mechanical displacement amplifier that is driven by a piezoelectric actuator. The piezoelectric actuator is capable of creating 5 lm displacement which is amplified to 10 lm by the plastic mechanical amplifier and finally such displacement generates 50–139 lm microgripper tip displacement. The second design is 20 lm thick electroplated nickel microgripper embedded in SU-8 adaptor for easy-to-handle operation. The second design is electro-thermally actuated using a set of jouleheated bent beams. With applied actuation voltage in the range of 2–4 V, the microgripper generates tip displacement of 4–32 lm. Extensive thermal and mechanical finite element modeling have been carried out and measurement results were compared with the simulation results. Such developed easy-to-handle microgrippers can be used for micro/nano pick-and-place assembly applications.
منابع مشابه
Design, numerical simulation and experimental investigation of an SU-8 microgripper based on the cascaded V-shaped electrothermal actuators
This paper presents the numerical simulation results and the experimental investigations of a polymeric microgripper designed using the cascaded V-shaped electrothermal actuators. The microgripper was simulated using electro-thermo-mechanical finite element method (FEM) based on Coventorware 2014 software in order to check the performance of the gripper. As structural material of the microgripp...
متن کاملMicro-manipulation of silicate micro-sized particles for biological applications
There are great challenges in biological research to study mechanical or chemical interactions between biological objects and artificial parts, to analyse the biocompatibility of artificial materials and/or to increase knowledge about biological cells. Some interaction studies between cells and artificial objects require to positioning very small objects whose typical size is comparable with ce...
متن کاملLow Voltage Thermo-mechanically Driven Monolithic Microgripper with Piezoresistive Feedback
Pick-and-place of micro/nano sized objects means handling of very tiny and very different in properties objects having specific behavior. Besides formal requirements of assembly processes, the tools for controllable manipulation with these objects should not affect the examined micro/nano environment, i.e. should be “small and passive” in any sense. Despite of the recent progress, most availabl...
متن کاملHigh aspect ratio tapered hollow metallic microneedle arrays with microfluidic interconnector
We present a novel microfabrication method for a tapered hollow metallic microneedle array and its complete microfluidic packaging for drug delivery and body fluid sampling applications. Backside exposure of SU-8 through a UV transparent substrate was investigated as a means of fabricating a dense array of tall (up to 400 lm) uniformly tapered SU-8 pillar structures with angles in the range of ...
متن کاملPrecise motion control of a piezolelectric microgripper for microspectrometer assembly
The Fourier Transform (FTIR) microspectrometer discussed in this paper is an example of a complex Micro-OptoElectro-Mechanical System (MOEMS) configured as an optical bench on a chip. It is an important benchmark application for microtechnology due to increased demands for the use of miniature wavelength detection instruments in bio, nano and material science. This device can be manufactured us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004