Development of a New Semi-active Friction Damper
نویسندگان
چکیده
منابع مشابه
Structural Control Based on Semi-active Variable Friction Dampers
This paper discusses a methodology of semi-active structural control using a variable friction damper. The presented algorithm is quite simple and straightforward, in which only the slip level of the friction damper is controlled in response to the interstory response velocity of the damperinstalled story so as to maintain the target constant ductility factor. In conducting control there is adv...
متن کاملFully Adaptive Semi-active Control of Vibration Isolation by Mr Damper
This paper is concerned with a new fully adaptive control scheme for vibration isolation using a semi-active MR damper installed between ground and first floor, which is composed of two adaptive controllers. One is an adaptive inverse controller which can give necessary input voltage to MR damper so as to generate specified reference damping force to be acted on a controlled structure. The inpu...
متن کاملUpgrading the Seismic Capacity of Pile-Supported Wharfs Using Semi-Active Liquid Column Gas Damper
One of the most important structures in the ports is the wharf. The most common one is the pile-supported wharf. This type of wharf is consisted of a number of piles and one deck which placed on the piles. In addition to the conventional loads that this structure should withstand, in seismic areas, pile-supported wharfs should have the necessary capacity and strength against seismic excitations...
متن کاملThe 14th World Conference on Earthquake Engineering
Semi-active control devices have been shown to be more energy efficient than active devices and more effective in reducing seismic structural vibration than passive devices. A new type of semi-active control device, the piezoelectric friction damper has been made in this paper. Piezoelectric actuators used in the dampers can quickly and accurately respond to a voltage signal. They are also effe...
متن کاملSemi–active Control of Adaptive Friction Dampers for Structural Vibration Control
Reduction of structural vibrations is of major interest in mechanical engineering for lowering sound emission of vibrating structures, improving accuracy of machines and increasing structure durability. Besides design optimization and passive damping treatments, active structural vibration control can be applied to reduce unwanted vibrations. They become more and more important as lightweight c...
متن کامل