A Thermomechanical Theory of Solid-Fluid Mixtures
نویسندگان
چکیده
Motivated by Rivlin's ideas on the thermomechanics of continuous media, we state the second law of thermodynamics in two parts and apply it to study the behavior of a mixture of an elastic solid and a viscous fluid.
منابع مشابه
Thermo-mechanical high-cycle fatigue analysis of exhaust manifold of turbocharged engine with two-way coupling FSI
NNowadays, car manufactures in order to increasing torque and power with consider to fuel consumption, have swept to production of turbocharged engines. With consider to exhaust gas-temperature rises in boosted engines, recognition of critical locations of exhaust manifold in the worse condition of engine (full load and maximum speed), to prevent fracture of exhaust manifold is very important. ...
متن کاملThermomechanical Analysis of Exhaust Manifold and Catalyst for with Fluid Structure Interaction
Design of exhaust manifold is important due to its effects on performance of catalyst, thermal and thermo- mechanical loads. In this paper, first transient analysis of fluid was carried out with FLUENT software, then time-average temperature and heat transfer coefficient contour for three cycle were mapped on inner surface of exhaust manifold with MATLAB software for thermomechanical analysis. ...
متن کاملCompositional Modeling of Wax Formation in Petroleum Mixtures
Heavy organics deposition is a common problem in oil industry, especially in oil production, transportation and processing. Wax or solid paraffin series are examples of heavy organics that deposit. Precipitation and crystallization of wax causes major difficulties in different processes. Based on multi-solid theory, a basic model is modified in this paper for wax precipitation in different oils...
متن کاملSimulation of nanodroplet impact on a solid surface
A novel computational fluid dynamics and molecular kinetic theory (CFD-MK) method was developed to simulate the impingement of a nanodroplet onto a solid surface. A numerical solution of the Navier–Stokes equation using a volume-of-fluid (VOF) technique was used to model nanodroplet deformation. Dynamic contact angle during droplet impact was obtained by molecular kinetic theory. This dynamic c...
متن کاملFundamental measure theory for hard-sphere mixtures revisited: the White Bear version
We develop a density functional for hard-sphere mixtures which keeps the structure of Rosenfeld’s fundamental measure theory (FMT) whilst inputting the Mansoori–Carnahan–Starling–Leland bulk equation of state. Density profiles for the pure hard-sphere fluid and for some binary mixtures adsorbed at a planar hard wall obtained from the present functional exhibit some improvement over those from t...
متن کامل