Concepts for Hybrid Micro Assembly Using Hot Melt Joining
نویسندگان
چکیده
Nowadays, the production of 3D MEMS and MOEMS is carried out by using hybrid integration of single components, for which batch production is normally preferred. In this field, adhesive technology is one of the major joining techniques. At the Collaboration Research Center 516, a batch process based on a joining technique which uses hot melt adhesives was developed. This technique allows the coating of micro components with hot melt in a batch. The coating process is followed by the joining process. Due to this, the time between coating and joining can be designed variably. Because of the short set times of hot melt adhesives, short joining times are possible. For this assembly process adapted heat management is necessary. This paper presents adapted heating management concepts and gripping systems which allow a fast and accurate assembly of hybrid micro systems with hot melt coated components. Therefore, the chosen gripping system depends on the process and heat management concept as well as the thermal properties of the components. Furthermore, the simulative and experimental results of the heat management concepts will be discussed.
منابع مشابه
Active Gripper for Hot Melt Joining of Micro Components
Precision assembly of hybrid micro systems requires not only a high precision handling and adjusting of the parts but also a highly accurate and fast bonding technique. In this field adhesive technology is one of the major joining techniques. At the Collaboration Research Center 516, a batch process based on a joining technique using hot melt adhesives was developed. This technique allows the c...
متن کاملFailure Mode and Analysis of the Bonded/bolted Joints between a Hybrid Fibre Reinforced Polymer and Aluminium Alloy
Composites are being used extensively in several engineering applications. However, the efficiency of the joints used in joining composites and metals can be improved. To move towards a sustainable and environment friendly future, natural fibre composite material was used. Towards the above objective, research work was carried out for the assembly between a composite and aluminium. Three differ...
متن کاملImproved Dissolution and Micromeritic Properties of Ibuprofen by Continuous Twin Screw Hot Melt Granulation Using Kolliphor P 188 Micro as Meltable Binder
متن کامل
Hot-Melt Extrusion Technique: A Review
Hot-melt extrusion is one of the most widely applied processing technologies in the plastic, rubber and food industry. Today this technology has found its place in the array of pharmaceutical manufacturing operations. Melt extrusion process are currently applied in the pharmaceutical field for the manufacture of a variety of dosage forms and formulations such as granules, pellets, tablets, supp...
متن کاملOnline Distribution and Load Balancing Optimization Using the Robin Hood and Johnson Hybrid Algorithm
Proper planning of assembly lines is one of the production managers’ concerns at the tactical level so that it would be possible to use the machine capacity, reduce operating costs and deliver customer orders on time. The lack of an efficient method in balancing assembly line can create threatening problems for manufacturing organizations. The use of assembly line balancing methods cannot balan...
متن کامل