Sensitivity Analysis of Characteristic Parameters of Railway Electric Traction System
نویسندگان
چکیده
The modal analysis, which decouples the contact wire and rail track conductors, is used to develop an integrated model of single rail track and contact wire. The characteristic impedance and propagation constant matrices of integrated model have been computed. The authors have studied effects of various parameters of interest on characteristic impedance and propagation constant using sensitivity analysis. The sensitivity functions of series impedance and shunt admittance related to contact wire and catenary have been developed and validated in this paper.
منابع مشابه
Parameters Assignment of Electric Train Controller by Using Gravitational Search Optimization Algorithm
The speed profile of the train will be determined according to criteria such as safety, travel convenience, and the type of electric motor used for traction. Due to the passengers and cargo on the train, the electric train load is constantly changing. This will require reassigning the speed controller’s parameters of the electric train. For this purpose, the Gravitational Search optimization Al...
متن کاملProtection setting in 2x25 kV 50 Hz railway traction systems by digital simulation
In this paper, after a short description of the problems related to the detection of short circuits in 2x25 kV 50 Hz traction systems, a methodology for the choice of the operating area of the relay for protections based on the comparison between a measured line impedance and a fixed minimum impedance is presented. The proposed methodology has been realized through the development of a procedur...
متن کاملPower Quality Improvement in Traction Power Supply Networks
AC railway traction loads are usually huge single phase loads. As a result, a significant amount of Negative Sequence Current (NSC) is injected into utility grid. Moreover, harmonics and consumption ofreactive power are further power quality problems that the supply network is encountering. In this paper, acompensation strategy with the aid of Railway Power Conditioner (RPC) is proposed to over...
متن کاملFuzzy Logic-Based Vector Control of Permanent Magnet Synchronous Motor Using Stacked Matrix Converter for Railway Traction Applications
Recently, Permanent Magnet Synchronous Motors (PMSMs) have been widely accepted and employed in traction and railway transportation applications due to their various advantages such as small inertia, high efficiency and high torque density. In this paper, in order to use these motors as traction drives in an effective way, the vector control scheme is employed. In this strategy, the stator curr...
متن کاملFast Estimation of Aggregated Results of Many Load Flow Solutions in Electric Traction Systems
Transports on rail are increasing and major railway infrastructure investments are expected. An important part of this infrastructure is the railway power supply system. The future railway power demands are naturally not known for certain. This means investment planning for an uncertain future. The more remote the uncertain future, the greater the amount of scenarios that have to be considered....
متن کامل