Designing of a Volcano Simulator
نویسندگان
چکیده
1First, two liquids (water and water with dye) are injected in the chamber and mix until a desired pressure is achieved (from 1 up to 4 atmospheres). Then, gas (compressed air) is introduced in order to decrease the density of the mixture at a given pressure. When the mixture is ready, it is heated until a desired temperature (from ambient temperature up to 150 oC), at this precise moment, a valve opens to simulate a fissure in the rock and a slight loss of pressure (eruption). This is the point desired to be studied, the behavior of the mixture during the loss of pressure. Also, it is possible to introduce more liquid or gas if it is necessary for the experiment.
منابع مشابه
Designing and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow
Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...
متن کاملDesigning and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow
Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...
متن کاملAnalyzing the Illumination and Resolution in Seismic Survey Designing
Seismic modeling aids the geophysicists to have a better understanding of the subsurface image before the seismic acquisition, processing, and interpretation. In this regard, seismic survey modeling is employed to make a model close to the real structure and to obtain very realistic synthetic seismic data. The objective of this study is to analyze the resolution and illumination of the fault by...
متن کاملDevelopment of a Dynamic Population Balance Plant Simulator for Mineral Processing Circuits
Operational variables of a mineral processing circuit are subjected to different variations. Steady-statesimulation of processes provides an estimate of their ideal stable performance whereas their dynamicsimulation predicts the effects of the variations on the processes or their subsequent processes. In thispaper, a dynamic simulator containing some of the major equipment of mineral processing...
متن کاملInvestigating the application of rainfall simulator for designing micro-catchment systems
Rain simulators are suitable tools for research related to the process of erosion and runoff. However, it is possible to use these simulators on other topics as well. For example, in designing the rainwater catchment systems such as micro-catchments for planting trees on slopes, curve pits in pastures, and determining the size of the water collection pond, knowledge of runoff coefficient and vo...
متن کامل