Title An LED Drive Circuit with Constant - Output - Current Control andConstant - Luminance Control
نویسندگان
چکیده
A Single LED is very small, and their luminance is related to the amount of driving current. Sufficient luminance for an illuminator requires many LEDs to be connected together and a constant current supplied to each LED. Therefore, the LED drive circuit must have constant-output-current control and/or constant-luminance control. We propose an LED drive circuit that consists of a boost-type DC-DC converter with constant-output-current control and constant-luminance control. This circuit is a switching regulator-type circuit controlled by pulse width modulation (PWM). Both the power and the constant-current control can be provided by a single system, without any ballast resistor or auxiliary current control circuit.
منابع مشابه
Speed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method
In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...
متن کاملSpeed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method
In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...
متن کاملA Novel ±0.5V Ultra High Current Drive and Output Voltage Headroom Current Output Stage with Very High Output Impedance
A novel ultra-high compliance, low power, very accurate and high output impedance current output stage (COS) with extremely high output current drive capability is proposed in this paper. The principle of operation of this unique structure is discussed, its most important formulas are derived and its outstanding performance is verified by HSPICE simulation in TSMC 0.18µm CMOS, BSIM3, and Level4...
متن کاملA Low Cost Sensorless Control Drive Circuit for of Low Voltage Switched Reluctance Motor
Shaft position sensing is an essential part of switched reluctance (SR) motor drive In order to synchronize the pulses of phase current with the period of rising inductance of the proper motor phase. Direct sensors such as, Hall effect and optical encoder are commonly used in SR motors. The purpose of this paper is to present an indirect shaft positioning sensing known as "sensorless " control ...
متن کاملCurrent Limitation and Speed Drop Minimization in Optimal-Efficiency of Induction Motors
In conventional direct torque control (DTC), the stator flux is usually kept constant by controlling the x-axis component of the stator voltage in the stator flux reference frame. The torque is then controlled by the y-axis component of stator voltage. In this scenario, the stator current does not exceed its permissible value. However, in the so-called optimal efficiency mode, the induction mot...
متن کامل