Sizing Equation Analysis for Field Controlled PM Machines: A Unified Approach
نویسندگان
چکیده
In this paper, the sizing equation analyses are presented for two different radial and axial flux field controlled PM machines. These types of machines have two sources of excitation which allows one to easily control the airgap flux. Variable flux component provided by the field winding and fixed flux component obtained from PM converge into the airgap so that an additive or subtractive effect can be achieved over a wide range such that the machine speed range can be increased. A detailed analysis is made in order to evaluate the performance, power density and efficiency. In addition, guidelines for optimal design of the two machines are pointed out.
منابع مشابه
Moditication Factor for Sizing Equation of Electrical Machines-Single and Three Phase Induction Motors(RESEARCH NOTE)
Comparison between the results from the design procedure based upon the value of D2L (volume of iron) and IEC standard used by manufacturers indicates that the basic design equation of electrical machines must be modified by a proper modification factor. This modification factor is evaluated for single- and three-phase induction motors and its variation with motor rating and poles number is obt...
متن کاملOptimal Design of Axial Flux Permanent Magnet Synchronous Motor for Electric Vehicle Applications Using GAand FEM
Axial Flux Permanent Magnet (AFPM) machines are attractive candidates for Electric Vehicles (EVs) applications due to their axial compact structure, high efficiency, high power and torque density. This paper presents general design characteristics of AFPM machines. Moreover, torque density of the machine which is selected as main objective function, is enhanced by using Genetic Algorithm (GA) a...
متن کاملOptimal Locating and Sizing of Unified Power Quality Conditioner- phase Angle Control for Reactive Power Compensation in Radial Distribution Network with Wind Generation
In this article, a multi-objective planning is demonstrated for reactive power compensation in radial distribution networks with wind generation via unified power quality conditioner (UPQC). UPQC model, based on phase angle control (PAC), is used. In presented method, optimal locating of UPQC-PAC is done by simultaneous minimizing of objective functions such as: grid power loss, percentage of n...
متن کاملAnalytical Modeling of Magnetic Field Distribution in Inner Rotor Brushless Magnet Segmented Surface Inset Permanent Magnet Machines
Brushless permanent magnet surface inset machines are interested in industrial applications due to their high efficiency and power density. Magnet segmentation is a common technique in order to mitigate cogging torque and electromagnetic torque components in these machines. An accurate computation of magnetic vector potential is necessary in order to compute cogging torque, electromagnetic torq...
متن کاملTORUS Concept Machines: Pre-Prototyping Assessment for Two Major Topologies
Two different external-rotor-internal-stator TORUS type axial flux PM machines can be derived based on the direction of the flux. In the first type of the TORUS machine, magnet driven flux enters stator and travels circumferentially along the stator core while in the second type the flux enters the stator and travels axially along the machine axis of rotation. The major differences between the ...
متن کامل