Direct Measurement of Wafer Temperature in White/UV LED Manufacture
نویسنده
چکیده
منابع مشابه
Study on the growth and survival of Escherichia coli O157:H7 during the manufacture and storage of Iranian white cheese in brine
The behaviour of Escherichia coli O157:H7 was studied during the manufacture and storage of Iranian white cheese in brine. Cheese was manufactured using pasteurized cow milk and inoculated with E. coli O157:H7 with inoculum level of 103 cfu/ml. Four treatments were designed. Cheeses were made with or without starter culture and kept immersed in 6 or 8% salt brine during ripening and storage. Ch...
متن کاملUV Activation Treatment for Hydrophobic Wafer Bonding
Enhanced hydrophobic bond-strength can be achieved by exposing prime grade silicon wafers to ultraviolet (UV) light and heat prior to bonding. The following independent variables were explored: platen temperature, UV exposure time, oxygen containing versus non-oxygen containing (nitrogen only) bonding atmosphere, and annealing temperature. The results suggest exposure to UV can be used as an ac...
متن کاملRemoval of Direct Red Dye 23 from Water and Wastewater Using S2O8 Oxidant Activated by UV Irradiation:An Investigation on the Operational Parameters
The photo-oxidative decolorization of Direct Red 23 (DR23), a textile dye which is suspected to be carcinogenic was investigated using peroxydisulfate activated by UV irradiation and heat in a batch photo-reactor at experimental conditions. A very simple analytical method, direct UV–vis spectrophotometric detection, was utilized for the progress of photo-oxidative decolorization of dye in aqueo...
متن کاملPrecise Temperature Mapping of GaN-Based LEDs by Quantitative Infrared Micro-Thermography
A method of measuring the precise temperature distribution of GaN-based light-emitting diodes (LEDs) by quantitative infrared micro-thermography is reported. To reduce the calibration error, the same measuring conditions were used for both calibration and thermal imaging; calibration was conducted on a highly emissive black-painted area on a dummy sapphire wafer loaded near the LED wafer on a t...
متن کاملUV Activation
Enhanced hydrophobic bond-strength can be achieved by exposing prime grade silicon wafers to ultraviolet (UV) light and heat prior to bonding. The following independent variables were explored: platen temperature, UV exposure time, oxygen containing versus non-oxygen containing (nitrogen only) bonding atmosphere, and annealing temperature. The results suggest exposure to UV can be used as an ac...
متن کامل