Solidifying Mud Cake to Improve Cementing Quality of Shale Gas Well: A Case Study
نویسندگان
چکیده
The purpose of this study is to improve the cementing quality of shale gas well by mud cake solidification, as well as to provide the better annular isolation for its hydraulic fracturing development. Based on the self-established experimental method and API RP 10, the effects of mud cake solidifiers on the shear strength at cement-interlayer interface (SSCFI) were evaluated. After curing for 3, 7, 15 and 30 days, SSCFI was remarkably improved by 629.03%, 222.37%, 241.43% and 273.33%, respectively, compared with the original technology. Moreover, the compatibility among the mud cake solidifier, cement slurry, drilling fluid and prepad fluid meets the safety requirements for cementing operation. An application example in a shale gas well (Yuanye HF-1) was also presented. The high quality ratio of cementing quality is 93.49% of the whole well section, while the unqualified ratio of adjacent well (Yuanba 9) is 84.46%. Moreover, the cementing quality of six gas-bearing reservoirs is high. This paper also discussed the mechanism of mud cake solidification. The reactions among H3AlO4 and H3SiO4 from alkali-dissolved reaction, Na and H3SiO4 in the mud cake solidifiers, and Ca and OH from cement slurry form the natrolite and calcium silicate hydrate (C-S-H) with different silicate-calcium ratio. Based on these, SSCFI and cementing quality were improved.
منابع مشابه
Experiments of Blast Furnace Slag as a Mud Cake Modifier and Its Trial in Horizontal Well I306H
Blast furnace slag (BFS) was added into drilling fluid as a mud cake modifier (MCM) for the reuse of BFS. The effects of MCM on drilling fluid rheology and shear strength of cementformation interface (SSCFI) were evaluated. The experimental results showed that the optimized formula of the drilling fluid has 1.0 wt% MCM. The simulation results showed that SSCFI increased significantly with the a...
متن کاملThe great potential of nanomaterials in drilling & drilling fluid applications
The continuous development of global economy with decreasing in available hydrocarbon sources and increasing discovery and extraction costs due to decrease in-situ oil and gas reservoir, displays the necessity of using new techniques for the improve rate of penetration and productivity in well. Nanotechnology has already contributed significantly to technological advances in the energy industri...
متن کاملThe great potential of nanomaterials in drilling & drilling fluid applications
The continuous development of global economy with decreasing in available hydrocarbon sources and increasing discovery and extraction costs due to decrease in-situ oil and gas reservoir, displays the necessity of using new techniques for the improve rate of penetration and productivity in well. Nanotechnology has already contributed significantly to technological advances in the energy industri...
متن کاملTwo-phase Simulation of Well Control Methods for Gas Kicks in Case of Water and Oil-based Muds
Kick occurrence is a possible event during a drilling process. It is required to be handled immediately using a well control method to avoid blowout, financial losses and damages to the drilling crew. Several methods including driller, wait and weight, and concurrent are applicable in the drilling industry to control a well during a kick incident. In this study, typical well control methods wer...
متن کاملDecreasing of water loss and mud cake thickness by CMC nanoparticles in mud drilling
CMC polymer is used as an additive to decrease water loss and mud-cake-thickness in mud drilling. In this study, the effect of CMC and CMC nanoparticles on water loss and mud-cake-thickness in mud drilling is investigated. CMC nanoparticles are made by using of ball milling and their size is measured by Particle size analyzer. CMC and CMC nanoparticles which were prepared by Hamilton batch mixe...
متن کامل