Measurement of liquid surface properties by laser-induced surface deformation spectroscopy.
نویسندگان
چکیده
We developed a technique of picking up the liquid surface in a noncontact manner by a cw-laser radiation. The momentum change of light at the laser transmission through the air-liquid interface appears as the radiation pressure, which deforms the liquid surface into the shape determined by the balance between the Laplace force of the curved surface and the radiation pressure. The displacement of the liquid surface is inversely proportional to the surface tension, which was measured by an optical probe. The dynamic response of the liquid surface deformation was theoretically derived under the periodical modulation of the radiation pressure. The experimentally observed spectra were in good agreement with the theory giving the dynamic properties of the liquid surface. The technique of the laser induced surface deformation has potential as a measurement tool of the surface dynamic properties, such as the time-dependent surface tension and surface viscoelasticity.
منابع مشابه
Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique
Titanium and titanium alloys are often used in orthopedic surgery and dentistry because of their especial characteristics such as biocompatibility, mechanical properties, and corrosion resistance. However, their bio- inertness is the most serious drawback for biomedical applications. Therefore, a bioactive coating like hydroxyapatite (HA) is coated on their surface. In this regard, in the prese...
متن کاملPartial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid
1-butyl-3-methyl imidazolinium hydroxide ionic liquid (BMIm[OH]) is loaded on commercial low surface area Pd-Ag/α-Al2O3 solid catalyst to enhance higher selectivity of acetylene partial hydrogenation. Different experimental techniques such as atomic absorption spectroscopy, surface area measurement and gas chromatography have been utilized to characterize chemical, structural and catalytic pro...
متن کاملSurface Modification of Silicone Rubber Membrane by Microwave Discharge to Improve Biocompatibility
Wetability of biocompatible polymers can be improved by plasma surface modification. The purpose of this study was to surface modify an experimental poly (dimethylsiloxane) rubber (PDMS) material in order to improve its wetability and biocompatibility. Surface properties of the PDMS were characterized using contact angles measurement for wetability analysis. Samples of experimental silico...
متن کاملCharacterization of Nd: Yag Laser Radiation Effects on Ti6Al4V Physico-Chemical Properties: An In Vivo Study
The effect of a Nd: YAG laser (1064 nm) has been studied on Ti6Al4V alloy in terms of optical and physical parameters for biomedical applications. The superior surface microhardness hardness (i.e. 377 VHN) is attributed to grain refinement associated with laser melting and rapid solidification. The electrochemical property, mainly pitting corrosion resistance, has been carried out in Hanks salt...
متن کاملPreparation and Characterization of ZnO Nanoparticles by Laser Ablation in NaOH Aqueous Solution
In the recent years, laser ablation in liquid has become an increasingly important technique for the fabrication of NPs. this paper reports our recent studies on the generation of ZnO NPs by ablation of metal targets in aqueous environments using Q-switch Nd-YAG laser (λ=532nm) immersed in NaOH (0.1M). The Surface topography studied by atomic force microscopy revealed wider size distributio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review. E, Statistical, nonlinear, and soft matter physics
دوره 63 4 Pt 2 شماره
صفحات -
تاریخ انتشار 2001