Engineering Analysis with Boundary Elements

نویسندگان

  • Chein-Shan Liu
  • Satya N. Atluri
چکیده

In this paper, the inverse Cauchy problem for Laplace equation defined in an arbitrary plane domain is investigated by using the collocation Trefftz method (CTM) with a better postconditioner. We first introduce a multiple-scale Rk in the T-complete functions as a set of bases to expand the trial solution. Then, the better values of Rk are sought by using the concept of an equilibrated matrix, such that the resulting coefficient matrix of a linear system to solve the expansion coefficients is best-conditioned from a view of postconditioner. As a result, the multiple-scale Rk can be determined exactly in a closedform in terms of the collocated points used in the collocation to satisfy the boundary conditions. We test the present method for both the direct Dirichlet problem and the inverse Cauchy problem. A significant reduction of the condition number and the effective condition number can be achieved when the present CTM is used, which has a good efficiency and stability against the disturbance from large random noise, and the computational cost is much saving. Some serious cases of the inverse Cauchy problems further reveal that the unknown data can be recovered very well, although the overspecified data are provided only at a 20% of the overall boundary. & 2012 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A boundary element/finite difference analysis of subsidence phenomenon due to underground structures

Analysis of the stresses, displacements, and horizontal strains of the ground subsidence due to underground excavation in rocks can be accomplished by means of a hybridized higher order indirect boundary element/finite difference (BE/FD) formulation. A semi-infinite displacement discontinuity field is discretized (numerically) using the cubic displacement discontinuity elements (i.e. each highe...

متن کامل

A Boundary Elements and Particular Integrals Implementation for Thermoelastic Stress Analysis

A formulation and an implementation of two-dimensional Boundary Element Method (BEM) analysis for steady state, uncoupled thermoelastic problems is presented. This approach differs from other treatments of thermal loads in BEM analysis in which the domain integrals due to the thermal gradients are to be incorporated in the analysis via particular-integrals. Thus unlike Finite Elements or Field ...

متن کامل

Numerical investigation of composite shear walls with different types of steel and concrete materials as boundary elements

The main objective of this study was to numerically assess the effect of boundary elements with different types of steel and concrete materials on nonlinear behavior of composite steel–reinforced concrete wall (CSRCW) by employing ABAQUS software. Two types of common steel profiles including box and I-shaped sections, located at the middle and extremities of the wall, were employed to assess th...

متن کامل

Modified Fixed Grid Finite Element Method to Solve 3D Elasticity Problems of Functionally Graded Materials

In the present paper, applicability of the modified fixed grid finite element method in solution of three dimensional elasticity problems of functionally graded materials is investigated. In the non-boundary-fitted meshes, the elements are not conforming to the domain boundaries and the boundary nodes which are used in the traditional finite element method for the application of boundary condit...

متن کامل

Effect of Debonding of Rebars on the Seismic Response of Boundary Elements of Lightly Reinforced Shear Walls

Rebar fracture in boundary elements of lightly reinforced shear walls in recent earthquake motivated research on the minimum longitudinal reinforcement applicable to shear walls. These researches lead to change in the ACI 318-19 requirement for minimum longitudinal reinforcement in boundary elements. New ACI 318 requirement increase minimum longitudinal reinforcement ratio for boundary elements...

متن کامل

Effect of Deformed and Plain Rebars on the Behavior of Lightly Reinforced Boundary Elements

Failure modes in recent earthquakes on lightly reinforced shear walls includes rebar fracture and out of plane buckling of its boundary elements. In latest edition of ACI 318 and also latest amendment of NZS 3101-2006 to avoid rebar fracture in boundary elements, the minimum reinforcement ratio for shear walls is increased. This experimental study investigates that rather than increasing reinfo...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013