Optimising heat exchanger network synthesis using convexity properties of the logarithmic mean temperature difference

نویسندگان

  • Miten Mistry
  • Ruth Misener
چکیده

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimal operation of heat exchanger networks with stream split: Only temperature measurements are required

For heat exchanger networks with stream splits, we present a simple way of controlling the split ratio. We introduce the “Jäschke Temperature”, which for a branch with one exchanger is defined as TJ = (T − T0)/(Th − T0), where T0 and T are the inlet and outlet temperatures of the split stream (usually cold), and Th is the inlet temperature of the other stream (usually hot). Assuming the heat tr...

متن کامل

A Simple Control Scheme for Near-optimal Operation of Parallel Heat Exchanger Systems

For heat exchanger networks with stream splits, we present a simple way of controlling the split ratio. We introduce the ”Jäschke Temperature”, which for a branch with one exchanger is defined as TJ = (T−T0) Th−T0 , where T0 and T are the inlet and outlet temperatures of the split stream (usually cold), and Th is the inlet temperature of the other stream (usually hot). Assuming the heat transfe...

متن کامل

Environmental sustainability enhancement of a petroleum refinery through heat exchanger network retrofitting and renewable energy

This paper presents a case study on the enhancement of environmental sustainability in a petroleum refining process based on an exergetic diagnostic approach. The Life Cycle Assessment (LCA) pinpointed crude oil production and electricity generating systems as the main sources of environmental unsustainability. The existing hot utility demand of the process is 78.4 MW with a temperature differe...

متن کامل

Optimization of Finned-Tube Heat Exchanger with Minimizing the Entropy Production rate

A compact fin-tube heat exchanger is used to transfer current fluid heat inside the tubes into the air outside. In this study, entropy production and optimized Reynolds number for finned-tube heat exchangers based on the minimum entropy production have been investigated. As a result, the total entropy of compact heat exchangers, which is the summation of the production rate of fluid entropy ins...

متن کامل

Calculation of Heat Transfer Coefficient of MWCNT-TiO2 Nanofluid in Plate Heat Exchanger

The objective of the present study is the synthesis of MWCNT-TiO2 hybrid nanostructures by solvothermal synthesis method with TiCl4 as precursor. The heat transfer enhancement due to the use of MWCNT-TiO2 nanofluid was investigated. As-prepared hybrid materials were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that MWCNTs were uniformly dec...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Computers & Chemical Engineering

دوره 94  شماره 

صفحات  -

تاریخ انتشار 2016