Mechanical Strength Properties of RCA Concrete Made by a Modified EMV Method

نویسندگان

  • Namho Kim
  • Jeonghyeon Kim
  • Sungchul Yang
  • Víctor Yepes
چکیده

This study used two types of Recycled Concrete Aggregates (RCAs) with the same original virgin aggregate, but with different amounts of residual mortars. To verify that the mechanical properties of the concrete were affected by changing the unit volume of residual mortar, fresh mortar, and total mortar of the concrete, a series of paving concrete mixes were made using a modified equivalent mortar volume (EMV) mix design, along with a conventional American Concrete Institute (ACI) mix design. The test results showed that the RCA concrete with the conventional mix design, which led to a prominent decrease in compressive strength and elastic modulus at each age, had 10% greater total mortar volume than that with the modified EMV mix design. As for the conventional ACI mix, it appears that the replacement ratio of RCA and the volume of the residual mortar in RCA directly affect the modulus of elasticity as well as the compressive strength of concrete. However, for the modified EMV mix, the modulus of elasticity of the concrete may be increased to be equivalent to the companion concrete with natural aggregate by controlling the new mortar volume so that the total mortar volume remains the same regardless of the RCA replacement ratio. It was observed that the smaller new volume requirement makes the RCA paving concrete more environmentally friendly and economically profitable.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Laboratory study of mechanical properties of ordinary concrete under high heat consumption in hydraulic structures, along with validation by SEM and XRD tests

In this laboratory research, a mixing plan was made of ordinary concrete containing Portland cement type 2 with a grade of 500 kg / m3. Compressive strength, tensile strength and modulus of elasticity tests of concrete were performed on concrete samples at 90 days of processing age at 21 °C and 600 ° C. In order to further evaluate and validate the results, SEM and XRD tests were performed on c...

متن کامل

Analysis of the Modifying Effect of Styrene Butadiene Rubber Latex Copolymer on Strength and Permeability Properties of Structural Light Aggregate Concrete

Polymers not only possess repairing functions concerning the concrete structures, but also due to their properties are used in making different types of polymer cements and improving the matrix structure of cement materials, enhancing the viscosity, mechanical, and stability power of concretes. Today, there is limited knowledge on the use of SBR in structural light aggregate concrete. In the pr...

متن کامل

Effects of Adding Fibre on Strength and Permeability of Recycled Aggregate Concrete Containing Treated Coarse RCA

Abstract—This paper presents the experiment results of investigating the effects of adding various types and proportions of fibre on mechanical strength and permeability characteristics of recycled aggregate concrete (RAC), which was produced with treated coarse recycled concrete aggregate (RCA). Two types of synthetic fibres (i.e., barchip and polypropylene fibre) with various volume fractions...

متن کامل

Investigating properties of fresh and hardened self-compacting concrete made of recycled aggregates

Self-compacting concrete is a new high performance concrete with high ductility and segregation resistance. In recent years, construction material manufacturers have focused their attention on lightweight concrete and have strived to use lightweight concrete, if possible, in load-bearing parts of buildings. Concrete with both self-compacting and lightweight properties is favourable in this cont...

متن کامل

Influences of Surface Characteristics and Modified Asphalt Binders on Interface Shear Strength

Weak bonding between layers of pavement leads to damages on the composite pavement. Bonding plays an important role in the durability and maintenance of composite pavement layers. The present study evaluates the factors effective in bond strength of the interface between concrete and asphalt pavements. The factors considered for this purpose include steel slag percentage in the concrete pavemen...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016